Course Title: Set up and adjust PID control loops
Part A: Course Overview
Program: C4317 Certificate IV in Instrumentation and Control
Course Title: Set up and adjust PID control loops
Portfolio: Vocational Education
Nominal Hours: 40
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.Flexible Terms
Course Code |
Campus |
Career |
School |
Learning Mode |
Teaching Period(s) |
EEET7161C |
City Campus |
TAFE |
174T School of VE Engineering, Health & Science |
Face-to-Face or Internet |
VE 2018 (All) |
Course Contact: Program Manager
Course Contact Phone: +61 3 9925 4468
Course Contact Email: vocenengineering@rmit.edu.au
Course Description
This unit covers providing solutions to predictable problems in process control loops. It encompasses working safely, applying logical problem solving procedures, evaluating performance, the use of measuring devices, providing solutions to predictable control problems, and documenting solutions.
Pre-requisite Courses and Assumed Knowledge and Capabilities
Granting competency in this unit shall be made only after competency in the following unit(s) has/have been confirmed.
Where pre-requisite pathways have been identified. All competencies in the Common Unit Group must be have been completed plus all the competencies in one (1) of the identified Pathway Unit Group(s):
Electrical
Instrumentation and Control
Common Unit Group
1. UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace
2. UEENEEE104A Solve problems in d.c. circuits
3. UEENEEE107A Use drawings, diagrams, schedules, standards, codes and specifications
4. UEENEEI101A Use instrumentation drawings, specification, standards and equipment manuals
5. UEENEEI102A Solve problems in pressure measurement components and systems
6. UEENEEI103A Solve problems in density/level measurement components and systems
7. UEENEEI104A Solve problems in flow measurement components and systems
8. UEENEEI105A Solve problems in temperature measurement components and systems
Electrical Pathway Group
9. UEENEEG101A Solve problems in electromagnetic devices and related circuits 10. UEENEEG102A Solve problems in low voltage a.c. circuits
10. UEENEEG102A Solve problems in low voltage a.c. circuits
Instrumentation and Control Pathway Group
11. UEENEEE119A Solve problems in multiple path extra low voltage (ELV) a.c. circuits
National Competency Codes and Titles
National Element Code & Title: |
UEENEEI106A Set up and adjust PID control loops |
Elements: |
1. Prepare to work on process control loops. 2. Solve process control loops problems. 3. Complete work and provide status report(s). |
Learning Outcomes
Refer to Elements
Overview of Assessment
Students must pass each of the following assessment tasks to demonstrate competent.
Assessment | |
Task 1 |
Compile project |
Task 2 |
Theory test |
Task 3 |
Labs and Theory Classes |
These tasks assesses the following Course Learning Outcomes (CLOs)
Assessment Mapping Matrix
Elements/ Performance Criteria Covered |
Task 1 |
Task 2 |
Task 3 |
1.1 |
X |
X |
X |
1.2 |
X |
X |
X |
1.3 |
X |
X |
X |
1.4 |
X |
X |
X |
1.5 |
X |
X |
X |
1.6 |
X |
X |
X |
1.7 |
X |
X |
X |
2.1. |
X |
X |
X |
2.2 |
X |
X |
X |
2.3 |
X |
X |
X |
2.4 |
X |
X |
X |
2.5 |
X |
X |
X |
2.6 |
X |
X |
X |
2.7 |
X |
X |
X |
3.1 |
X |
X |
X |
3.2 |
X |
X |
X |
3.3 |
X |
X |
X |