Course Title: Produce basic engineering drawings
Part A: Course Overview
Program: C4386 Certificate IV in Tertiary Preparation
Course Title: Produce basic engineering drawings
Portfolio: Vocational Education
Nominal Hours: 80
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.Terms
Course Code |
Campus |
Career |
School |
Learning Mode |
Teaching Period(s) |
MIET7058C |
City Campus |
TAFE |
174T School of VE Engineering, Health & Science |
Face-to-Face or Internet |
Term2 2017, Term1 2018, Term2 2018, Term1 2019, Term2 2019, Term2 2020, Term1 2021 |
Course Contact: Program Manager
Course Contact Phone: +61 3 9925 4468
Course Contact Email: trainingsupport@rmit.edu.au
Course Description
This unit applies to any of the full range of engineering disciplines. All work is carried out under supervision and all specifications, dimensions and tolerances are predetermined. The unit covers application of introductory drafting skills to select and apply drawing protocols.
Manual drafting or computer-aided design (CAD) drawing equipment may be used.
If CAD skills are required, MEM30031A Operate computer-aided design (CAD) system to produce basic drawing elements, should be selected.
Drawings are completed to Australian Standard (AS) 1100.101–1992 Technical drawing – General principles.
Pre-requisite Courses and Assumed Knowledge and Capabilities
NIL
National Competency Codes and Titles
National Element Code & Title: |
MEM30032A Produce basic engineering drawings |
Elements: |
1. Identify drawing requirements 2.Select drawing features 3. Prepare and detail drawings 4.Select physical dimensions and produce engineering parts list 5.Complete drawing documentation |
Learning Outcomes
Refer to Elements
Overview of Assessment
Assessment Tasks
Assessment 1: Engineering and Workshop
Assessment 2: Drawing Portfolio
Assessment 3: Drawing Test
These tasks assess the following Course Learning Outcomes (CLOs):
Assessment Mapping Matrix
Elements/Performance Criteria | Engineering & Workshop Terms Test | Drawing Portfolio | Drawing Test |
1.1 | X | X | X |
1.2 | X | X | X |
1.3 | X | X | X |
1.4 | X | X | X |
1.5 | X | X | |
2.1 | X | X | X |
2.2 | X | X | |
2.3 | X | X | |
2.4 | X | X | |
2.5 | X | X | |
3.1 | X | X | |
3.2 | X | X | |
3.3 | X | X | |
3.4 | X | X | |
3.5 | X | X | |
3.6 | X | X | X |
4.1 | X | X | X |
4.2 | X | X | X |
5.1 | X | X | X |
5.2 | X | X | X |
5.3 | X | X | X |