Course Title: Apply principles of networking technologies for manufacturing and engineering applications
Part A: Course Overview
Program: C5398 Diploma of Applied Technologies
Course Title: Apply principles of networking technologies for manufacturing and engineering applications
Portfolio: Vocational Education
Nominal Hours: 60
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.Important Information:
Please note that this course may have compulsory in-person attendance requirements for some teaching activities.
To participate in any RMIT course in-person activities or assessment, you will need to comply with RMIT vaccination requirements which are applicable during the duration of the course. This RMIT requirement includes being vaccinated against COVID-19 or holding a valid medical exemption.
Please read this RMIT Enrolment Procedure as it has important information regarding COVID vaccination and your study at RMIT: https://policies.rmit.edu.au/document/view.php?id=209.
Please read the Student website for additional requirements of in-person attendance: https://www.rmit.edu.au/covid/coming-to-campus
Please check your Canvas course shell closer to when the course starts to see if this course requires mandatory in-person attendance. The delivery method of the course might have to change quickly in response to changes in the local state/national directive regarding in-person course attendance.
Terms
Course Code |
Campus |
Career |
School |
Learning Mode |
Teaching Period(s) |
COSC6231 |
City Campus |
TAFE |
174T School of VE Engineering, Health & Science |
Face-to-Face or Internet |
Term1 2021 |
COSC6231 |
City Campus |
TAFE |
520T Future Technologies |
Face-to-Face or Internet |
Term1 2022, Term1 2023 |
Course Contact: Program Manager
Course Contact Phone: +61 3 9925 8311
Course Contact Email: amita.iyer@rmit.edu.au
Course Description
This unit describes the performance outcomes, skills and knowledge required to analyse network technologies to install and configure a basic network for manufacturing and engineering applications.
It includes the ability to analyse networking and cloud computing concepts, establish key features of Open Systems Interconnect (OSI) and Transmission control Protocol/Internet Protocol (TCP/IP) to install and configure a basic network for engineering and manufacturing applications.
Pre-requisite Courses and Assumed Knowledge and Capabilities
Nil
National Competency Codes and Titles
National Element Code & Title: |
VU22316 Apply principles of networking technologies for manufacturing and engineering applications |
Elements: |
1. Analyse networking concepts for manufacturing and engineering applications 2. Analyse cloud computing concepts for manufacturing and engineering applications 3. Establish key features of OSI and TCP/IP 4. Install and configure a basic network for engineering and manufacturing applications |
Learning Outcomes
Refer to Elements and Performance Criteria
Overview of Assessment
Assessment 1: Practical Test
Assessment 2: Lab Work
Assessment 3: Assignment
These tasks assess the following Course Learning Outcomes (CLOs):
Assessment Mapping Matrix
Elements/ Performance Criteria Covered |
Assessment 1 Practical Test |
Assessment 2 Lab Work |
Assessment 3 Assignment |
1.1 |
|
X |
X |
1.2 |
X |
X |
X |
1.3 |
X |
X |
X |
1.4 |
|
X |
X |
2.1 |
|
X |
X |
2.2 |
|
X |
X |
3.1 |
X |
X |
X |
3.2 |
|
X |
X |
3.3 |
X |
X |
X |
3.4 |
X |
X |
X |
3.5 |
X |
X |
X |
3.6 |
X |
X |
X |
3.7 |
X |
X |
X |
3.8 |
X |
X |
X |
3.9 |
X |
X |
X |
4.1 |
X |
X |
X |
4.2 |
X |
X |
|
4.3 |
X |
X |
X |
4.4 |
X |
X |
X |
4.5 |
X |
X |
X |
4.6 |
X |
X |
X |
4.7 |
X |
X |
|