Course Title: Install discharge pipes
Part B: Course Detail
Teaching Period: Term1 2015
Course Code: BUIL6264C
Course Title: Install discharge pipes
School: 130T Vocational Engineering
Campus: City Campus
Program: C3312 - Certificate III in Plumbing
Course Contact: Program Manager
Course Contact Phone: +61 3 9925 4468
Course Contact Email: vocengineering@rmit.edu.au
Name and Contact Details of All Other Relevant Staff
Program Manager - Warren James
Tel: +61 3 9925 4468
Email: warren.james@rmit.edu.au
Nominal Hours: 28
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
CPCPCM2043A Carry out WHS requirements.
Course Description
This unit of competency specifies the outcomes required to install pipework from soil and wastewater fixtures to a stack or drain.
In some jurisdictions, this unit of competency may form part of accreditation, licensing, legislative, regulatory or certification requirements.
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title: |
CPCPSN3022A Install discharge pipes |
Element: |
1 Prepare for work. |
Element: |
2 Identify installation requirements. |
Element: |
3 Install and test pipe system. |
Element: |
4 Clean up. |
Learning Outcomes
Refer to Elements.
Details of Learning Activities
Learning activities include in class workbook activities and researching industry practices and standards. This may include online learning activities. Students are expected to undertake design, size and documentation to relevant industry standards to include sustainability and WHS principles.
Teaching Schedule
This unit is delivered over 2 sessions and is assessed together with the following clustered units:
CPCPSN3024A - Install and fit off sanitary fixtures,
CPCPWT3021A - Set out and install water services,
CPCPWT3026A - Fit off and commission heated and cold water services.
Session Number | Topic | Learning Activities/Resources | Elements/ Performance Criteria | Assessments |
1 |
Theory of installing discharge pipes to the following fixtures: Bathroom including, shower, bath, basin WC, |
Pearsons Sanitary and Drainage. Chapt. 7 Pgs 215-238 Pearson’s Chapt. 7 Powerpoint Introduce AS/NZS 3500 |
1.1, 1.3, 1.4, 1.5, 1.6 |
Pearsons Sanitary and Drainage. Worksheets 1 - 3 |
1 Cont…. | Swmns, underpinnings, formative tasks | Recording Book | 1.2, 2.1, 2.2, 2.3, 2.4, 2.5 | Sign off theory, underpinning questions and SWMS in Student Sign-off Book, Enter on Atlas |
2 | Practical Tasks | Recording Book | 3.1, 3.2, 3.3, 3.4, 3.5 4.1, 4.2, 4.3 |
Practical Assessments, Tasks 28B, 29B, 30B, 31B Following assessment clean up site, store and maintain tools, recycle re-usable material. |
Learning Resources
Prescribed Texts
Pearsons Basic Plumbing Services Skills Sanitary Drainage will be provided to all students enrolled in this unit. |
9781442508668 |
References
Other Resources
Overview of Assessment
Assessment may incorporate a variety of methods including written/oral activities and demonstration of practical skills to the relevant industry standards. Participants are advised that they are likely to be asked to personally demonstrate their assessment activities to their teacher/assessor. Feedback will be provided throughout the course.
Assessment Tasks
Students must pass each of the following assessment tasks to demonstrate competent.
Assessment | |
Task 1 |
|
Task 2 |
Practical tasks |
These tasks assesses the following Course Learning Outcomes (CLOs):
Assessment Mapping Matrix
Element/ Performance Criteria Covered |
Task 1 |
Task 2 |
1.1 |
X |
|
1.2 |
X |
|
1.3 |
X |
|
1.4 |
|
X |
1.5 |
|
X |
1.6 |
|
X |
2.1 |
|
X |
2.2 |
|
X |
2.3 |
|
X |
2.4 |
|
X |
2.5 |
|
X |
3.1 |
|
X |
3.2 |
|
X |
3.3 |
|
X |
3.4 |
|
X |
4.1 |
|
X |
4.2 |
|
X |
4.3 |
|
X |
To be deemed competent you must demonstrate an understanding of all aspects required of the competency. Assessment methods have been designed to measure your achievement of each competency in a flexible manner over multiple tasks.
Assessment Tasks
Students are required to complete 2 different types of assessment tasks
Assessment 1 – Submit workbook underpinning questions and completed SWMS. (Weighting 30%)
Assessment 2 – Practical installation of discharge pipes to the sanitary fixtures in the following plumbing areas:
Bathroom, Kitchen, Laundry, Ablution Area (weighting 70%)
To successfully complete this unit, a student needs to be deemed competent (CA grade) in both assessment tasks.
Grading Criteria:
NYC - Not yet competent
CA - Competence Achieved
DNS - Did not submit assessment
Assessment Matrix
Assessment Task Element/ PC Percentage Weighting
Assessment 1 – Written tasks - Workbook Element 1.1, 1.3, 1.4, 1.5, 1.6, 1.2, 2.1, 2.2, 2.3, 2.4, 2.5 30%
Assessment 2 - Practical installation of discharge pipes to sanitary fixtures in designated plumbing areas:
Element 3.1, 3.2, 3.3, 3.4, 3.5 4.1, 4.2, 4.3 70%
Other Information
Academic Misconduct
Students are reminded that cheating, whether by fabrication, falsification of data, or plagiarism, is an offence subject to University disciplinary procedures. Plagiarism in oral or written presentations is the presentation of the work, idea or creation of another person, without appropriate referencing, as though it is one’s own. Plagiarism is not acceptable.
The use of another person’s work or ideas must be acknowledged. Failure to do so may result in charges of academic misconduct which carry a range of penalties including cancellation of results and exclusion from your course.
Students are responsible for ensuring that their work is kept in a secure place. It is also a disciplinary offence for students to allow their work to be plagiarized by another student.
Students should be aware of their rights and responsibilities regarding the use of copyright material. It is strongly recommended that students refer to the Guidelines for Students at the RMIT University Homepage.
Course Overview: Access Course Overview