Course Title: Follow safe work practices for direct client care
Part B: Course Detail
Teaching Period: Term1 2020
Course Code: OHTH5920C
Course Title: Follow safe work practices for direct client care
Important Information:
This course is delivered and assessed in a cluster with Manage legal and ethical compliance (CHCLEG003).
This course is delivered across two program areas in the school of Vocational Design and Social Context. You will be assigned to either the Social Care or the FSSI program delivery
School: 375T Vocational Design and Social Context
Campus: City Campus
Program: C4365 - Certificate IV in Disability
Course Contact: Renee Costa
Course Contact Phone: +61 3 9925 0886
Course Contact Email: renee.costa@rmit.edu.au
Name and Contact Details of All Other Relevant Staff
Steven Bruechert
+61 99254063
steve.bruechert@rmit.edu.au
Nominal Hours: 25
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
None
Course Description
This course describes the skills and knowledge required for a worker to participate in safe work practices to ensure their own health and safety, and that of others in work environments that involve caring directly for clients. It has a focus on maintaining safety of the worker, the people being supported and other community members.
This course applies to all workers who require knowledge of workplace health and safety (WHS) to carry out their own work, in both centre-based and home-based service provision.
This course is delivered and assessed with:
CHCLEG003 - Manage legal and ethical compliance
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title: |
HLTWHS002 Follow safe work practices for direct client care |
|
Element: |
1. Follow safe work practices for direct client care |
|
Performance Criteria: |
1.1 Follow workplace policies and procedures for safe work practices 1.2 Identify existing and potential hazards in the workplace, report them to designated persons, and record them according to workplace procedures 1.3 Identify any client-related risk factors or behaviours of concern, report them to designated persons, and record them according to workplace procedures 1.4 Follow workplace policies and procedures to minimise risk 1.5 Identify and report incidents and injuries to designated persons according to workplace procedures |
|
Element: |
2. Follow safe work practices for manual handling |
|
Performance Criteria: |
2.1 Follow manual handling procedures and work instructions for minimising manual handling risk 2.2 Identify manual handling hazards and report in line with workplace procedures 2.3 Apply control measures for minimising manual handling risk |
|
Element: |
3. Follow safe work practices for infection control |
|
Performance Criteria: |
3.1 Follow standard precautions as part of own work routine to prevent the spread of infection 3.2 Recognise situations when additional infection control procedures are required 3.3 Apply additional precautions when standard precautions alone may not be sufficient to prevent transmission of infection 3.4 Identify risks of infection and report them according to workplace procedures |
|
Element: |
4. Contribute to safe work practices in the workplace |
|
Performance Criteria: |
4.1 Raise WHS issues with designated persons according to organisational procedures 4.2 Participate in workplace safety meetings, inspections and consultative activities 4.3 Contribute to the development and implementation of safe workplace policies and procedures in own work area |
|
Element: |
5. Reflect on own safe work practices |
|
Performance Criteria: |
|
Learning Outcomes
On successful completion of the unit you will have developed and applied the skills and knowledge required to demonstrate competency in the above elements. By applying this knowledge and these skills, you will maintan your own safety and that of others in your work environments.
Details of Learning Activities
- class exercises to review discussions and workshops
- seminars/workshops/presentations
- practical demonstration and use of workplace equipment and tasks
- guest presentations
- group discussions
- research in and out of class time
- independent workplace case study
- group activities/projects
Teaching Schedule
Workshops |
National code |
Unit title |
Unit/cluster description |
1 2 and 3 |
CHCLEG003 |
Manage legal and ethical compliance |
Management based, with focus on participation in policy development and compliance processes. The community and disability services sectors are required to comply with a range of legal and ethical standards and responsibilities in working with people with disabilities. In this unit you will develop and use the knowledge and skills required to research information about compliance and ethical responsibilities and develop and monitor policies and procedures to meet those responsibilities.
|
3 and 4 |
HLTWHS002 |
Follow safe work practices for direct client care |
OHS units follows and is also heavily regulated Introduce and reflect on the skills and knowledge required for a worker to participate in safe work practices to ensure their own health and safety, and that of others in work environments that involve caring directly for clients. It has a focus on maintaining safety of the worker, the people being supported and other community members. This applies to all workers who require knowledge of workplace health and safety (WHS) to carry out their own work, in both centre-based and home-based service provision. Practical based unit including manual handling, workplace risk assessments and workplace OHS practices. Most staff will have done organisational orientation including OHS requirements, so bring existing knowledge and practices. |
Learning Resources
Prescribed Texts
References
Other Resources
Overview of Assessment
This course is assessed with CHCLEG003 Manage legal and ethical compliance. The assessment tasks are as follows:
Task 1: Prepare and respond to case studies
Task 2: Develop and communicate a policy and procedure
Task 3: Demonstrate safe work practices
Task 4: Cluster quiz 1- workplace safety and legal and ethical compliance
Task 5: Knowledge quiz 2
Assessment Tasks
Task 1 - Knowledge Questions
Task 2- case studies
Task – 3 Simulation
Task 4 - Simulation and Reflection
Task 5 - Third-Party (Supervisor Reports) (supplementary evidence) |
The following questions can be uploaded onto Canvas.
Submit the Case Study template and completed incident report via the Canvas submission point for the task.
Observation simulation task (simulated environment or workplace)
Observation and group activities – partial could be done via canvas / collaborate with observation in workplace or simulated
Workplace supervisor completes with student in workplace once completed student could upload to CANVAS |
Assessment Matrix
An assessment matrix for this unit will be available from the Program Coordinator.
Other Information
This is a Work Integrated Learning course and you will be assessed either in a simulated environment or the workplace.
Please refer to the RMIT student page for extensive information about study support, assessment, extensions, appeals and a range of other matters: rmit.edu.au/students
Cover Sheet for Submissions You must complete a submission cover sheet for every piece of submitted work, including online submissions. This signed sheet acknowledges that you are aware of implications of plagiarism.
Attendance It is strongly advised that you attend all sessions in order to engage in the required learning activities, ensuring the maximum opportunity to gain the competency.
Applying for an Extension
Extension of time for assessment tasks may be granted where circumstances beyond your control prevent submission by the published due date. Speak with your teacher or course coordinator regarding applying for an extension.
Applying for Special Consideration
If you are seeking an extension of more than seven calendar days (from the original due date) you must lodge an Application for Special Consideration form, preferably prior to, but no later than two working days after the official due date. Late applications will only be accepted in exceptional circumstances. For information about Special Consideration and how to apply, see:
http://www1.rmit.edu.au/students/specialconsideration
Academic Integrity
Academic integrity means honesty and responsibility in scholarship through respecting the work of others whilst having the freedom to build new insights, new knowledge and ideas. RMIT University upholds the values of academic integrity as fundamental to the scholarship undertaken by all members of its community. Whenever you refer to another person’s research or ideas (either by directly quoting or paraphrasing them) you must acknowledge your source.
If you are even in doubt about how to properly cite a reference, consult your lecturer or the academic integrity website: http://www.rmit.edu.au/academicintegrity
The RMIT library provides tools to assist with your referencing http://www1.rmit.edu.au/library/referencing
Plagiarism and Collusion
Plagiarism and collusion constitute extremely serious academic misconduct, and are forms of cheating. You are reminded that cheating, whether by fabrication, falsification of data, or plagiarism, is an offence subject to University disciplinary procedures. Plagiarism is the presentation of the work, idea or creation of another person as though it is your own. It is a form of cheating and is a very serious academic offence that may lead to expulsion from the University. Plagiarised material can be drawn from, and presented in, written, graphic and visual form, including electronic data, and oral presentations. Plagiarism occurs when the origin of the material used is not appropriately cited. Plagiarism is not acceptable.
Examples of plagiarism include:
- Copying sentences or paragraphs word-for-word from one or more sources, whether published or unpublished, which could include but is not limited to books, journals, reports, theses, websites, conference papers, course notes, etc. without proper citation;
- Closely paraphrasing sentences, paragraphs, ideas or themes without proper citation;
- Piecing together text from one or more sources and adding only linking sentences;
- Copying or submitting whole or parts of computer files without acknowledging their source;
- Copying designs or works of art and submitting them as your original work;
- Copying a whole or any part of another student's work; and
- Submitting work as your own that someone else has done for you.
- Enabling Plagiarism: the act of assisting or allowing another person to plagiarise or to copy your own work is also an offence.
For further information, please see the RMIT Plagiarism Policy – http://www.rmit.edu.au/browse;ID=sg4yfqzod48g1 (unresolved) – and the RMIT Student Conduct Regulations – http://www1.rmit.edu.au/browse;ID=r7a7an6qug93
Plagiarism Software
The originality verification software Turnitin may be used in this course. For details, see: http://www.turnitin.com
Complaints Procedure:
RMIT University is committed to providing a harmonious study and work environment for all students and staff. The University recognises your right to raise concerns about academic, administrative or support services without recrimination and has policies and procedures to assist in the resolution of complaints.
Most issues are resolved at the local level and you are encouraged to take steps to resolve your issue locally. The student complaint procedure details steps to take if your problem is not resolved or you believe the response you received is unreasonable.
Student Complaints Policy: http://www1.rmit.edu.au/policies/studentcomplaintspolicy
Student complaints Procedure: http://www1.rmit.edu.au/browse;ID=i1lexipvjt22
Student Complaints Form: http://mams.rmit.edu.au/v4ujvmyojugxz.pdf
Course Overview: Access Course Overview
Course Overview: Access Course Overview