Course Title: Select common engineering materials
Part B: Course Detail
Teaching Period: Term2 2022
Course Code: PROC5277C
Course Title: Select common engineering materials
Important Information:
Please note that this course may have compulsory in-person attendance requirements for some teaching activities.
To participate in any RMIT course in-person activities or assessment, you will need to comply with RMIT vaccination requirements which are applicable during the duration of the course. This RMIT requirement includes being vaccinated against COVID-19 or holding a valid medical exemption.
Please read this RMIT Enrolment Procedure as it has important information regarding COVID vaccination and your study at RMIT: https://policies.rmit.edu.au/document/view.php?id=209.
Please read the Student website for additional requirements of in-person attendance: https://www.rmit.edu.au/covid/coming-to-campus
Please check your Canvas course shell closer to when the course starts to see if this course requires mandatory in-person attendance. The delivery method of the course might have to change quickly in response to changes in the local state/national directive regarding in-person course attendance
School: 520T Future Technologies
Campus: City Campus
Program: C4411 - Certificate IV in Tertiary Preparation
Course Contact: Melanie Reynolds
Course Contact Phone: +61399254059
Course Contact Email: melanie.reynolds@rmit.edu.au
Name and Contact Details of All Other Relevant Staff
Nominal Hours: 40
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
NIL
Course Description
In this course you will cover recognising common materials used in engineering, assisting in the selection of a material for a specific application, and using test results to evaluate the properties of materials.
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title: |
MEM30007A Select common engineering materials |
Element: |
1. Identify common engineering materials by their principal properties |
Performance Criteria: |
1.1. The principal properties of ferrous and non-ferrous metals are identified. 1.2. The principal properties of thermosetting and thermoplastic polymers are identified. 1.3. The principal properties of ceramics and composite materials are identified. 1.4. The effects of different types of bonding in materials are identified. 1.5. The effects of mechanical and thermal processes on the principal properties of materials are identified. |
Element: |
2. Select materials for specific applications |
Performance Criteria: |
2.1. The engineering requirement for the specific application is determined in consultation with others. 2.2. Material is selected based on the requirement and consideration of principal properties and further processing. 2.3. Selection is confirmed according to standard operating procedures. |
Element: |
3. Verify selected material as fit for purpose |
Performance Criteria: |
3.1. Appropriate tests for the required properties are identified. 3.2. Testing of materials is arranged with appropriate persons, if necessary. 3.3. Test results are analysed and material choices are confirmed or modified as appropriate. |
Learning Outcomes
On successful completion of this course you will have developed and applied the skills and knowledge required to demonstrate competency in the above elements.
Details of Learning Activities
Students will involve in the following learning activities to meet requirements for this competency and stage 1 competencies for Engineering Associates.
-
Lectures
• Tutorial - Laboratory practicals
Teaching Schedule
Week |
Topics Delivered |
Element / Performance Criteria |
1 |
Introduction of course Overview of the subject, chemical bonding, grain structures |
1.1, 1.2, 1.3, 1.4, 1.5 |
2 |
Mechanical testing of materials |
2.1, 2.2, 2.3, 3.1, 3.2, 3.3 |
3 |
Stress, strain, behaviour of materials Writing technical reports |
2.1, 2.2, 2.3, 3.1, 3.2, 3.3 |
4 |
Properties of materials Hardness testing, fatigue testing, impact testing |
1.1, 1.2, 1.3, 1.4, 1.5, 2.1, 2.2, 2.3, 3.1, 3.2, 3.3 |
5 |
Heat treatment Assessment 1: Unit test (date, time and venue are to be confirmed) |
2.1, 2.2, 2.3, 3.1, 3.2, 3.3 |
6 |
Ferrous metals Feedback from 1st assessment |
1.1, 1.2, 1.3, 1.4, 1.5, 2.1, 2.2, 2.3, 3.1, 3.2, 3.3 |
7 |
Non-ferrous metals |
1.1, 1.5, 2.1, 2.2, 2.3 |
8 |
Composite materials |
1.1, 1.5, 2.1, 2.2, 2.3 |
9 |
Rolling, forging and recrystallisation |
1.1,1.2, 1.3, 1.4,1.5, 2.1, 2.2, 2.3, 3.1, 3.2, 3.3 |
10 |
Casting and powder metallurgy |
1.1, 2.1, 2.2, 2.3, 3.1, 3.3 |
11 |
Corrosion, hazards and control measures for materials |
1.1, 2.1, 2.2, 2.3, 3.1, 3.2, 3.3 |
12 |
Assessment 2: Laboratory practical – Tensile and Hardness testing of mild steel (date, time and venue are to be confirmed) Practical report is to be submitted to Canvas week 14 |
1.1,1.5, 2.1, 2.2, 2.3 |
13 |
Ceramics |
1.5, 2.1, 2.2, 2.3 |
14 |
Polymers |
1.5, 2.1, 2.2 |
15 |
Joining of materials |
1.1, 2.1, 2.2, 2.3 |
16 |
Surface finishes for materials Student feedback, revision and review of this competency |
1.1, 1.2, 1.3, 1.4, 1.5, 2.1, 2.2, 2.3, 3.1, 3.2, 3.3 |
17 |
Assessment 3: Final Test (date, time and venue are to be confirmed) |
1.1, 1.2, 1.3, 1.4, 1.5, 2.1, 2.2, 2.3, 3.1, 3.2, 3.3 |
18 |
Student feedback |
1.1, 1.2, 1.3, 1.4, 1.5, 2.1, 2.2, 2.3, 3.1, 3.2, 3.3 |
Learning Resources
Prescribed Texts
References
Other Resources
Unit of competency details:
MEM30007A - Select common engineering materials (Release 1)
Downloadable at:
https://training.gov.au/Training/Details/MEM30007A
Overview of Assessment
Assessment for this course is ongoing throughout the semester. Your knowledge and understanding of course content is assessed through participation in class exercises, oral/written presentations and through the application of learned skills and insights. Full assessment briefs will be provided and can be found on CANVAS.
Assessment Tasks
Assessment 1: Unit Test
Assessment 2: Laboratory Practical and Report
Assessment 3: Final Test
Note:
Must attempt and achieve satisfactory (pass) in ALL assessment to gain satisfactory (pass) in this course.
Assessment Matrix
Elements/ Performance Criteria Covered |
Unit Test |
Lab Report |
Final Test |
1.1 |
X |
X |
X |
1.2 |
X |
X |
X |
1.3 |
X |
|
X |
1.4 |
X |
|
X |
1.5 |
X |
|
X |
2.1 |
|
X |
X |
2.2 |
|
X |
X |
2.3 |
|
X |
X |
3.1 |
|
X |
X |
3.2 |
|
X |
X |
3.3 |
|
X |
X |
Other Information
Students are expected to spend minimum two (2) hours weekly at least on completing readings, quizzes and weekly exercises. Follow the prescribed instructions fully (e.g. file type, deadline, submission spot, etc.) to handle and submit assessments.
Course Overview: Access Course Overview