Course Title: Apply manipulation techniques to create experimental textile samples
Part B: Course Detail
Teaching Period: Term2 2013
Course Code: VART5910C
Course Title: Apply manipulation techniques to create experimental textile samples
School: 350T Fashion & Textiles
Campus: Brunswick Campus
Program: C5213 - Diploma of Textile Design and Development
Course Contact : Julia Raath
Course Contact Phone: +61 3 99259201
Course Contact Email:julia.raath@rmit.edu.au
Name and Contact Details of All Other Relevant Staff
Nominal Hours: 60
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
Students must be concurrently enrolled on MANU 5918C Select Raw Materials
Course Description
This unit covers the skills and knowledge required to use manipulation techniques to create a variety of different effects using fabrics, fibres and other materials for 2D and 3D design effects.
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title: |
LMTTD4010A Apply manipulation techniques to create experimental textile samples |
Element: |
1 Identify manipulation techniques |
Performance Criteria: |
1.1 Types of manipulation are identified. |
Element: |
2 Describe uses of manipulation in design process |
Performance Criteria: |
2.1 Uses of manipulation to inform and inspire design are described. |
Element: |
3 Manipulate textiles to produce work sample |
Performance Criteria: |
3.1 Manipulation techniques are applied to a variety of textiles and textile products. |
Learning Outcomes
The unit applies to the manipulation of a range of fibres, fabrics and other material used in the production of garments, accessories, interior and exterior applications, commissioned textiles, 2 dimensional and 3 dimensional objects. Evidence of competency in this skill requires a minimum of three types of manipulation.
Details of Learning Activities
This studio based course will enable students to gain an understanding of textile manipulation processes, including
surface design and construction techniques.
You will be expected to undertake practical tasks, problem solving exercises, and a variety of design briefs presented in a range of settings including individual and group projects.
Teaching Schedule
week 1. Intro. & assessment requirements. OHS, Manipulating materials to produce 3D outcome. Project 1 intro and brief
week 2. Project 1: Under and over paper weave –plain, twill , other. Tonal/ Contrast palette. Manipulate variety of materials to produce a sculptural outcome.
week 3. Explore thermoplastic manipulation of different fabrics. Collect rusty pieces. Project 1 due.
week 4. Painting with Disperse dyes. Transfer printing.
week 5. Intro Project 2 Collars and Cuffs. Rust Dyeing
week 6. Project 2: Collars and Cuffs Shibori: explore different techniques and dye samples.Trade-Up Resource Swap Meet
week 7. Project 2: Collars and Cuffs indigo dyeing, wax resist
week 8. Continue Project 2: Collars and Cuffs
week 9. Complete Project 2: Collars and Cuffs
week 10. Project 2: Collars and Cuffs present completed project
week 11. Felting: make a bag/hat
week 12. Project 3: Punctured; pricked; perforated. Use different stitch techniques to decorate felted bag/hat.
week 13. Project 3: Punctured; pricked; perforated due.
week 14 Project 4 Project 4 - Knit Knot Net Coil class investigation of knit, knot, net, coil techniques.
week 15. Project 4 Knit Knot Net Coil individual exploration of constructed textile structures
week 16. Project 4 Knit Knot Net Coil class presentation due.
Learning Resources
Prescribed Texts
References
Braddock and O’Mahony, Techno Textiles Revolutionary Fabrics for Fashion and Design, Thames and Hudson |
Other Resources
You will be charged a materials fee which cover items such as fabric, dyes, card board, paper and assorted resources required for projects .
You are required to provide your own tool kit
Scissors, cutting blade, cutting mat, assorted fabrics and other material, masking tape, tape measure, ruler, note book, visual diary and sample folio. Gloves, rags
Lab coats and fully covered shoes are required in workshops.
Overview of Assessment
To achieve successful completion of this course students must demonstrate an understanding of all elements of competency.
Detailed course and assessment requirements and information will be made available to you first week of class. Specific details will be explained to you during scheduled classes.
Assessment tasks have been designed to measure achievement of each competency in a flexible manner.
Students will be awarded a graded assessment only if competency has been demonstrated within the standard enrolment period on the first assessment attempt.
Units assessed as ‘not yet competent’ on a first assessment attempt and ‘competent’ on a second or subsequent attempt are to have results amended to competent but are not eligible for grading.
Students are advised that they are likely to be asked to personally demonstrate their assessment work to their teacher.
All work must be submitted by the due date. Late submission will not be graded higher than a PASS.
Assessment Tasks
To achieve successful completion of this course you must demonstrate an understanding of all elements of
competency.
Assessment tasks have been designed to measure achievement of each competency in a flexible manner.
Assessment will incorporate a variety of methods including:
• Technical file
• Sample swatch book
• Individual research report / presentation
Technical Folio: including evidence of completed 3D sculptural form; dye samples; thermoplastic
samples; project samples; OHS requirements; class handouts and recipes
Detailed project briefs and information about assessment items will be provided in class time.
Project 1 Under and over weaving to produce 3D outcome
Project 2 Collars and Cuffs: Disperse dyes and thermoplastic manipulation rust dyeing and use of Shibori techniques.incorporating traded resources
Project 3 Punctured; pricked; perforated incorporating traded resources
Project 4 Knit Knot Net Coil: exploration of constructed textile structures
Visual Diary:
The Book: group visual diary exercise
Research and development; Image bank including drawings, inspirational images,
Documentation of technical considerations including photographs
Documentation of processes undertaken; Additional notes and personal research
Assessment Matrix
<meta http-equiv="content-type" content="text/html; charset=utf-8">elements</meta> | Folio of technical samples and reports |
Project 1: Under and over
|
Project 2: Collars and cuffs |
Project 3: Punctured, pricked, perforated
|
Project 4: Knit knot |
1. Identify manipulation techniques
|
1.1; 1.2; 1.3; 3.5; 3.6 |
1.2; 1.3; | 1.1; 1.3 | 3.5; 3.6 | |
2.Describe uses of manipulation in design processes |
2.1; 2.2 | 2.1; 2.2; 2.3; 2.4 |
2.1; 2.2; 2.3; 2.4 3.1; 3.2; 3.3; 3.4 |
2.1; 2.2; 2.3; 2.4 |
|
3 Manipulate textiles to produce work samples | 3.5; 3.6 | 3.1; 3.2; 3.3; 3.4; 3.5; 3.6 | 3.1; 3.2; 3.3; 3.4; 3.5; 3.6 | 3.1; 3.2; 3.3; 3.4; |
3.1; 3.2; 3.3; 3.4 |
Other Information
This course is run in a workshop environment, to comply with Occupational Health & Safety standards you students are required to wear sturdy footwear with covered toe protection, and other personal protective equipment where instructed.
Study and learning Support:
Study and Learning Centre (SLC) provides free learning and academic development advice to all RMIT students.
Services offered by SLC to support numeracy and literacy skills of the students are:
- Assignment writing, thesis writing and study skills advice
- Maths and science developmental support and advice
- English language development
Please refer http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and Learning Support.
Disability Liaison Unit:
Students with disability or long-term medical condition should contact Disability Liaison Unit to seek advice and support to complete their studies.
Please refer http://www.rmit.edu.au/disability to find more information about services offered by Disability Liaison Unit.
Late submission:
Students requiring extensions for 7 calendar days or less (from the original due date) must complete and lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.
The application must be lodged no later than one working day before the official due date. The student will be notified within no more than 2 working days of the date of lodgment as to whether the extension has been granted.
Students seeking an extension of more than 7 calendar days (from the original due date) must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official due date.
Assignments submitted late without approval of an extension will not be accepted or marked.
Special consideration:
Please refer http://www.rmit.edu.au/browse;ID=riderwtscifm to find more information about special consideration.
Plagiarism:
Plagiarism is a form of cheating and it is very serious academic offence that may lead to expulsion from the University.
Please refer: www.rmit.edu.au/academicintegrity to find more information about plagiarism.
Course Overview: Access Course Overview