Course Title: Produce computer-aided drawings
Part B: Course Detail
Teaching Period: Term1 2020
Course Code: GRAP6369C
Course Title: Produce computer-aided drawings
School: 375T Vocational Design and Social Context
Campus: Brunswick Campus
Program: C5382 - Diploma of Product Design
Course Contact: Robin Blood
Course Contact Phone: +61 3 9925 4683
Course Contact Email: robin.blood@rmit.edu.au
Name and Contact Details of All Other Relevant Staff
Nominal Hours: 50
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
None
Course Description
This unit describes the skills and knowledge required to use a range of computer-aided design and drafting (CADD) program functions to produce drawings. The focus of this unit is on the technical skills required to operate CADD, not on design skills.
It applies to individuals who use computer-aided drawing skills in various contexts.
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title: |
CUAACD302 Produce computer-aided drawings |
Element: |
1. Prepare for computer-aided drawing work |
Performance Criteria: |
1.1 Clarify drawing requirements in concept or project information 1.2 Identify hardware, software, tools and equipment required for computer-aided design and drafting projects 1.3 Set up hardware and software according to operating instructions and organisational procedures 1.4 Identify and retrieve digitised information relevant to projects |
Element: |
2. Gather object parameters and/or measurements |
Performance Criteria: |
2.1 Establish and record critical dimensions and data for required designs 2.2 Identify requirements in relation to accuracy, tolerances and other key information |
Element: |
3. Prepare plots or drawings |
Performance Criteria: |
3.1 Access and use CADD functions and features according to operating instructions 3.2 Access and use peripheral equipment required for projects 3.3 Prepare and review preliminary drawings in consultation with relevant people |
Element: |
4. Finalise drawings |
Performance Criteria: |
4.1 Check designs against project objectives and specifications according to organisational procedures 4.2 Identify and make required adjustments to designs based on review and consultation with relevant people 4.3 Store data files according to operating instructions and organisational procedures 4.4 Submit final drawings within agreed time parameters |
Learning Outcomes
In completing this unit, student will learn the knowledge in operating a CAD software to produce a technical drawing as part of communication aid to present to manufacturer and client.
Details of Learning Activities
This course will be delivered through face-to-face classes and by utilising the learning support material and resources here in Canvas. This unit describes the performance outcomes, skills and knowledge required to use a range of computer-aided design and drafting (CADD) program functions to produce drawings.
The focus of this unit is on the technical skills required to operate CADD, not on design skills which are covered in other units in CUV11 Visual Arts, Craft and Design Training Package.
Teaching Schedule
Week No. | Class | Description | Element(s) |
1 | Intro | Introduction to will be covered - review of SW1 | 1,2,3 |
2 | Multi Bodies | Multi bodies - and introduction, pros and cons | 1,2 |
3 | In context review | Review in context modeling - Ikea stool | 1,2,3,4 |
4 | Configurations | Configurations, where when and why | 1,2,3 |
5 | Multi Bodies continued | Multi bodies - looking at further uses and applications | 1,2,4 |
6 | Equations | Overview of equations | 1,2,3 |
7 | Equations continued | Applying equations to models and assemblies - Lego desk | 1,2,3,4 |
8 | Assessment 1 handed out | Assessment 1 handed out | 1,2,3,4 |
9 | Reverse engineering | Taking measurements and modeling approaches | 2,3,4 |
10 | Working on assessment 1 | Working on Assessment 1 | 1,2,3,4 |
11 | Assessment 2 handed out | Assessment 2 handed out | 1,2,3,4 |
12 | Assessment 1 Gate | Assessment 1 Gate - in-class feedback | 1,2,3,4 |
13 | Working on Assessment 1 and 2 | Working on Assessments | 1,2,3,4 |
14 | Assessment 1 Submission Assessment 2 Gate | Assessment 1 submission Assessment 2 Gate | 1,2,3,4 |
15 | In class feedback | In-class feedback for Assessment 2 - applying changes | 1,2,3,4 |
16 | Assessment 2 Submission | Assessment 2 submission - Re-submissions, in-class feedback and consultation |
Lesson plan may be subject to changes throughout the semester
Learning Resources
Prescribed Texts
References
Other Resources
Overview of Assessment
Assessment is on-going throughout the course. Assessment will incorporate a range of methods to assess performance and the application of knowledge and skills and will include:
EXAMPLES
- Practical tasks, a major project
- direct observation including exploration of and experimentation with techniques
- written and/or oral questioning and discussion to assess knowledge and understanding
- completion of a design journal and/or portfolio including personal reflection and feedback
- direct questioning combined with review of portfolios of evidence
The RMIT student charter summarises your responsibilities as a student as well as those of your teachers. http://mams.rmit.edu.au/kh6a3ly2wi2h1.pdf
Assessment Tasks
Assignment task 1 - practical project
Due: Week 14
Assignment task 2 - practical project
Due: Week 16
Assessment Matrix
Other Information
Teaching schedule may vary according to students and task requirements
Information is correct at time of publishing.
Course Overview: Access Course Overview