Course Title: Construct models

Part B: Course Detail

Teaching Period: Term2 2023

Course Code: DENT5861C

Course Title: Construct models

Important Information:

Please note that this course may have compulsory in-person attendance requirements for some teaching activities.  

To participate in any RMIT course in-person activities or assessment, you will need to comply with RMIT vaccination requirements which are applicable during the duration of the course. This RMIT requirement includes being vaccinated against COVID-19 or holding a valid medical exemption.  

Please read this RMIT Enrolment Procedure as it has important information regarding COVID vaccination and your study at RMIT: https://policies.rmit.edu.au/document/view.php?id=209.  

Please read the Student website for additional requirements of in-person attendance: https://www.rmit.edu.au/covid/coming-to-campus  

  

Please check your Canvas course shell closer to when the course starts to see if this course requires mandatory in-person attendance. The delivery method of the course might have to change quickly in response to changes in the local state/national directive regarding in-person course attendance.

School: 535T Social Care and Health

Campus: City Campus

Program: C5387 - Diploma of Dental Technology

Course Contact: Luke Scarica

Course Contact Phone: 03 9925 0312

Course Contact Email: luke.scarica@rmit.edu.au


Name and Contact Details of All Other Relevant Staff

Nominal Hours: 40

Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.

Pre-requisites and Co-requisites

None

Course Description

This unit of competency describes the skills and knowledge required to construct models from impressions of the patient’s maxillary or mandibular jaws.

This unit applies to work in dental technology.


National Codes, Titles, Elements and Performance Criteria

National Element Code & Title:

HLTDET001 Construct models

Element:

1. Verify integrity of the impression

Performance Criteria:

1.1 Apply standard precautions when receiving, handling and working on dental materials

1.2 Decontaminate impressions according to infection control guidelines

1.3 Examine impressions for defects

1.4 Check impressions to ensure they meet the specifications of the work order

1.5 Handle impressions with care to avoid damage or distortion

1.6 Ensure accompanying models are intact with no defects or adjustments required

1.7 Prepare a range of impressions for pouring

Element:

2. Select and prepare model materials

Performance Criteria:

2.1 Select appropriate model materials

2.2 Ensure all equipment used for mixing materials is clean

2.3 Prepare model materials in accordance with desired outcomes

2.4 Maintain and store model materials in accordance with manufacturers’ instructions

Element:

3. Pour impressions

Performance Criteria:

3.1 Pour model materials into impressions in accordance with accepted techniques

3.2 Allow required setting time

Element:

4. Finish model

Performance Criteria:

4.1 Separate intact model from the impression.

4.2 Inspect the model for defects

4.3 Trim the model in accordance with requirements

4.4 Duplicate the master model to create a working model where required by work order


Learning Outcomes


On completion of this course, you will be able to:

  1. Verify integrity of impressions 
  2. Select and prepare model materials 
  3. Pour impressions
  4. Finish model 


Details of Learning Activities

Theory: knowledge material required to effectively complete tasks outlined in elements and performance criteria of this unit, manage tasks and manage contingencies in the context of the work role such as construct models using a range of materials. 

Practical: Dental Laboratory exercises/activities required to correctly interpret work orders and construct models according to industry standards whilst following and maintaining effective WHS and infection control procedures.


Teaching Schedule

Semester 2 2023

Session

Topic

Learning Materials and Activities

Assessment Remarks

1

 

Session 1: Learning and Teaching Materials

Theory:

Topic 1 covering Tooth morphology and oral landmarks.
Topic 2 covering material sciences 


Practical:

Log book activities and construction of models according to prescription

This theory session will inform the completion of your knowledge assessment 

2

 

Session 2: Learning and Teaching Materials

Practical:

Log book activities and construction of models according to prescription 

These practical sessions will prepare you for the practical assessment 

3

 

Session 3: Learning and Teaching Materials

Practical:

Log book activities and construction of models according to prescription

These practical sessions will prepare you for the practical assessment 

4

Session 4: Practical Assessment

In this session you will be expected to combine all previous session knowledge and skill to construct satisfactory models under exam conditions.


Learning Resources

Prescribed Texts


References


Other Resources


Overview of Assessment

You must show evidence of the ability to complete tasks outlined in elements and performance criteria of this unit, manage tasks and manage contingencies in the context of the job role. There must be evidence that you have:

• used standard precautions and safe work practices to prepare models, using a range of materials specifically prepared against written instructions and manufacturers’ instructions, for at least 4 different types of impressions (must be a combination of maxillary and mandibular arches):

   - dentate

   - partially dentate

   - edentulous

• critically evaluated the 4 different types of models produced to meet technical laboratory and clinician requirements.

To be deemed competent you must demonstrate an understanding of all aspects required of the competency.   

Regular attendance is necessary. 

Assessment methods have been designed to measure your achievement of each competency in a flexible manner over multiple tasks and consist of theory and practical based tasks.


Assessment Tasks

Students enrolled in Vocational Education and Training qualifications are assessed for Competency. To be assessed as Competent means you have consistently demonstrated the required knowledge and skills at a standard expected in the workplace.

To be assessed as Competent in this course, you will need to complete each assessment task to a satisfactory standard. You will receive feedback from the teacher at the conclusion of each assessment task.

You should refer to the assessment brief which is available through Canvas for full assessment criteria.

Assessment Task 1: Knowledge Assessment

Due:
ST1D 16/08/23

The theory assessment will include short answer questions and diagrams as required.

Assessment Task 2: Practical Assessment

Due:
ST1D 09/08/23

During your practical assessment you will be required to correctly interpret work orders to construct and critically evaluate 4 different types of models using a range of material for 4 different types of impressions according to technical laboratory and clinician requirements, whilst under exam conditions.

Results that apply to courses that are delivered and assessed in accordance with competency-based assessment are:

CA: Competency Achieved

NYC: Not Yet Competent

DNS: Did not Submit for Assessment


Assessment Matrix

The assessment tasks listed in this course guide address all the elements and criteria of the requirements of this course.

Other Information

Attendance: Your learning experience will involve class-based teaching, discussions, demonstrations and practical exercises. It is strongly advised that you attend all timetabled sessions. This will allow you to engage in the required learning activities, ensuring you the maximum opportunity to complete this course successfully.


Information about your studies:  You can access My Studies through the RMIT website for information about timetables, important dates, assessment dates, results and progress, Canvas etc.

https://www.rmit.edu.au/students

 
Assessment: Information on assessment including Special consideration, Adjustments to assessment, (eg. applying for an extension of time):

https://www.rmit.edu.au/students/student-essentials/assessment-and-exams/assessment


Academic Integrity and Plagiarism: RMIT University has a strict policy on plagiarism and academic integrity. Please refer to the website for more information on this policy.

https://www.rmit.edu.au/students/student-essentials/assessment-and-exams/academic-integrity


Credit Transfer and Recognition of Prior Learning: Credit transfer is the recognition of previously completed formal learning (an officially accredited qualification).

Recognition of Prior Learning (RPL) is an assessment process that allows you to demonstrate competence using the skills you have gained through experience in the workplace, voluntary work, informal or formal training or other life experiences.  

Please speak to your teacher if you wish to discuss applying for Credit Transfer or RPL for the unit(s) of competency addressed in this course.

https://www.rmit.edu.au/students/student-essentials/enrolment/apply-for-credit

Course Overview: Access Course Overview