Course Title: Use drawings, diagrams, schedules, standards, codes and specifications
Part B: Course Detail
Teaching Period: Term1 2014
Course Code: EEET6995C
Course Title: Use drawings, diagrams, schedules, standards, codes and specifications
School: 130T Vocational Engineering
Campus: City Campus
Program: C6120 - Advanced Diploma of Engineering Technology - Electrical
Course Contact: Program Manager
Course Contact Phone: +61 3 9925 4468
Course Contact Email: trainingsupport@rmit.edu.au
Name and Contact Details of All Other Relevant Staff
Mr. Anu Mehta
Phone: +61-3-9925 4252
Email: anu.mehta@rmit.edu.au
Nominal Hours: 40
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
UEENEEE101A
Course Description
This unit covers the use of drawings, diagrams, cable schedules, standards, codes and specifications as they apply to the various electrotechnology work functions. It encompasses the rudiments for communicating with schematic, wiring and mechanical diagrams and equipment and cable/connection schedules, manuals, site and architectural drawings and plans showing the location of services, apparatus, plant and machinery and understanding the use and format of compliance standards and job specifications.
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title: |
UEENEEE107A Use drawings, diagrams, schedules, standards, codes and specifications |
Element: |
1. Prepare to use drawings, diagrams, schedules and manuals. |
Performance Criteria: |
1.1 Established OHS risk control measures and procedures are followed. |
Element: |
2. Use drawings, diagrams, schedules and manuals to obtain job information. |
Performance Criteria: |
2.1 Drawings, diagrams, schedules and/or manuals are selected, appropriate to the work being undertaken. |
Element: |
3. Use drawings, diagrams, schedules and manuals to convey information and ideas. |
Performance Criteria: |
3.1 Drawing conventions are used in neat freehand drawings to convey information and ideas to others involved in the work to be undertaken |
Element: |
4. Prepare to use compliance standards, codes and specifications. |
Performance Criteria: |
4.1 Compliance Standards and Codes that apply to particular disciplines are sought and obtained. |
Learning Outcomes
Refer to Elements
Details of Learning Activities
You will involve in the following learning activities to meet requirements for this competency and stage 1 competencies for Engineering Associates
• Laboratory Activities
• Classroom Tutorials
• Lectures
Engineers Australia Mapping Information:
This course is mapped against stage 1 competencies for Engineering Associates developed by Engineers Australia as detailed below
EA1.1. Comprehensive, theory based understanding of the underpinning natural and physical sciences and the engineering fundamentals applicable to the engineering
EA1.2. Conceptual understanding of the, mathematics, numerical analysis, statistics, and computer and information sciences which underpin the engineering discipline.
EA1.3. In-depth understanding of specialist bodies of knowledge within the engineering discipline.
EA1.4. Discernment of knowledge development and research directions within the engineering discipline.
EA1.5. Knowledge of contextual factors impacting the engineering discipline.
EA1.6. Understanding of the scope, principles, norms, accountabilities and bounds of contemporary engineering practice in the specific discipline.
EA2.1. Application of established engineering methods to complex engineering problem solving.
EA2.2. Fluent application of engineering techniques, tools and resources.
EA2.3. Application of systematic engineering synthesis and design processes.
EA2.4. Application of systematic approaches to the conduct and management of engineering projects.
EA3.1. Ethical conduct and professional accountability.
EA3.2. Effective oral and written communication in professional and lay domains.
EA3.3. Creative, innovative and pro-active demeanour.
EA3.4. Professional use and management of information.
EA3.5. Orderly management of self and professional conduct.
EA3.6. Effective team membership and team leadership
Teaching Schedule
The proposed teaching schedule for this competency is detailed below:
Week | Topics Delivered | Elements/Performance Criteria |
1 | Overview of course and assessment schedule. Introduction to Engineering Drawing: Manual Drawing and its use |
1.1, 1.2, 1.3, 2.1 |
2 | Mechanical Drawing - conventions - abbreviations and symbols - interpretation |
1.1, 1.2 2.1, 2.2, 2.3, 2.4, 3.1, 3.2 |
3 | Isometric Projections First angle and Third angle projection | 1.1, 1.2 2.1, 2.2, 2.3, 2.4, 3.1, 3.2, |
4 | Isometric Projections First angle and Third angle projection | 1.1, 1.2, 2.1, 2.2, 2.3, 2.4, 3.1, 3.2 |
5 | Architectural Drawings - conventions - abbreviations and symbols - location symbols Lab Exercises |
1.1, 1.2, 2.1, 2.2, 2.3, 2.4 |
6 | Electrical drawings | 1.1, 1.2, 1.3 2.1, 2.2, 2.3 3.1, 3.2 4.1, 4.2 |
7 | Electrical drawings | 1.1, 1.2, 1.3, 2.1, 2.2, 2.4, 3.1, 3.2, 3.3 |
8 | Circuit diagrams | 1.1, 1.2, 1.3, 2.1, 2.2, 2.4, 3.1, 3.2, 3.3 |
9 |
Wiring diagrams Assignment Issued |
1.1, 1.2, 1.3 2.1, 2.2, 2.4 3.1, 3.2, 3.3 4.1, 4.2, 4.3 |
10 | Wiring diagrams | 1.1, 1.2, 1.3 2.1, 2.2, 2.4 3.1, 3.2, 3.3 4.1, 4.2, 4.3 |
11 |
Cable Schedules |
1.1, 1.2, 1.3 2.1, 2.2, 2.4 3.1, 3.2, 3.3 4.1, 4.2, 4.3 |
12 | Free Hand Drawing. | 1.1, 1.2, 1.3 2.1, 2.2, 2.3, 2.4 2.5, 2.6, 3.1, 3.2, 3.3 4.1, 4.2 |
13 | Building construction drawings and diagrams | 1.1, 1.2, 1.3 2.1, 2.2, 2.3, 2.4, 2.5, 2.6 3.1, 3.2, 3.3 |
14 | Building construction drawings and diagrams | 1.1, 1.2, 1.3 2.1, 2.2, 2.3, 2.4, 2.5, 2.6 3.1, 3.2, 3.3 |
15 | Revision / Practice / Complete Lab Activities | 1.1, 1.2, 1.3 2.1, 2.2, 2.3, 2.4, 2.5, 2.6 3.1, 3.2, 3.3 4.1, 4.2, 4.3 |
16 | Revision / Practice/ Complete Lab Activities Assignment Due(week 16) |
1.1, 1.2, 1.3, 1.4, 1.5 2.1, 2.2, 2.3 3.1, 3.2 4.1, 4.2 |
17 | Practical Test | 1.1, 1.2, 1.3 2.1, 2.2, 2.3, 2.4, 2.5, 2.6 3.1, 3.2, 3.3 4.1, 4.2, 4.3 |
18 | Feedback / Catch Up |
Learning Resources
Prescribed Texts
References
Electrotechnology Practice by Jeffery Hampson |
9781442523258 |
Other Resources
Lecture notes, Laboratory exercises and other course material is available on the blackboard/student network drive.
S:\C6120/EEET6995C Drawings
You will also access manual and standards using the Internet
Overview of Assessment
The assessment is conducted in both theoretical and practical aspects of the course according to the performance criteria set in the National Training Package. Assessment may incorporate a variety of methods including written/oral activities and demonstration of practical skills to the relevant industry standards. Participants are advised that they are likely to be asked to personally demonstrate their assessment activities to their teacher/assessor. Feedback will be provided throughout the course. To successfully complete this course you will be required to demonstrate competency in each assessment task detailed under Assessment Tasks:
Assessment 1: Lab Activities
Weighting towards final grade (%): 40
Assessment 2: Assignment
Weighting towards final grade (%): 20
Assessment 3: Test
Weighting towards final grade (%): 40
These tasks assesses the following Course Learning Outcomes (CLOs):
Assessment Mapping Matrix
Element/Performance Criteria | Lab Activities | Assignment | Test |
1.1 | x | x | x |
1.2 | x | x | x |
1.3 | x | x | |
2.1 | x | x | |
2.2 | x | x | x |
2.3 | x | x | x |
2.4 | x | x | x |
2.5 | x | x | |
2.6 | x | x | |
3.1 | x | x | x |
3.2 | x | x | x |
3.3 | x | x | x |
4.1 | x | x | x |
4.2 | x | x | |
4.3 | x | x |
Assessment Tasks
• Lab Exercises, 40%
• Assignment, 20%
• Practical Test, 40%
This course is graded as Competent or Not Yet Competent and subsequently the following course grades are allocated:
80 - 100: CHD - Competent with High Distinction
70 - 79: CDI - Competent with Distinction
60 - 69: CC - Competent with Credit
50 - 59: CAG - Competency Achieved - Graded
0 - 49: NYC - Not Yet Competent
DNS - Did Not Submit for Assessment.
Assessment Matrix
Assessment vs UEENEEE107A Elements & Performance Criteria
UEENEED104A Elements & Performance Criteria | |||||||||||||||
Assessments | 1.1 | 1.2 | 1.3 | 2.1 | 2.2 | 2.3 | 2.4 | 2.5 | 2.6 | 3.1 | 3.2 | 3.3 | 4.1 | 4.2 | 4.3 |
Lab Exercises | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x |
Assignment | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x |
Practical Test | x | x | x | x | x | x | x | x | x | x |
Assessment vs Engineers Australia Stage 1 Competencies
Engineers Australia Stage 1 Competencies | ||||||||||||||||
EA1.1 | EA1.2 | EA1.3 | EA1.4 | EA1.5 | EA1.6 | EA2.1 | EA2.2 | EA2.3 | EA2.4 | EA3.1 | EA3.2 | EA3.3 | EA3.4 | EA3.5 | EA3.6 | |
Assignment | X | X | X | X | X | |||||||||||
Lab Exercises | X | X | X | X | X | X | X | X | X | X | X | |||||
Practical Test | X | X | X | X | X | |||||||||||
All Assessments | 1 | 1 | 3 | 3 | 2 | 1 | 2 | 2 | 2 | 1 | 0 | 1 | 1 | 0 | 0 | 1 |
0 (Blank) | Graduate attribute is not assessed. | |||||||||||||||
1 | Graduate attribute is assessed in at least one, but less than one-third, of the Element | |||||||||||||||
2 | Graduate attribute is assessed in at least one third, but less than two-thirds, of the Element | |||||||||||||||
3 | Graduate attribute is assessed in more than two-thirds of the Element |
Other Information
• Student directed hours involve completing activities such as reading online resources, assignment, individual student-teacher course-related consultation. Students are required to self-study the learning materials and complete the assigned out of class activities for the scheduled non-teaching hours. The estimated time is 10 hours outside the class time.
Study and Learning Support:
Study and Learning Centre (SLC) provides free learning and academic development advice to you. Services offered by SLC to support your numeracy and literacy skills are:
- Assignment writing, thesis writing and study skills advice
- Maths and science developmental support and advice
- English language development
Please Refer http://www.rmit.edu.au/students/studyandlearningcentre to find more information about Study and learning Support
Disability Liaison Unit:
If you are suffering from long-term medical condition or disability, you should contact Disability Liaison Unit to seek advice and support to complete your studies.
Please Refer http://www.rmit.edu.au/disability to find more information about services offered by Disability Liaison Unit
Late Submission:
If you require an Extension of Submittable Work (assignments, reports or project work etc.) for 7 calendar days or less (from the original due date) and have valid reasons, you must complete and lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.
The application must be lodged no later than one working day before the official due date. You will be notified within no more than 2 working days of the date of lodgement as to whether the extension has been granted.
If you seek an Extension of Submittable Work for more than 7 calendar days (from the original due date) must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official due date.
Submittable Work (assignments, reports or project work etc.) submitted late without approval of an extension will not be accepted or marked.
Special Consideration:
Please refer http://www.rmit.edu.au/specialconsideration to find more information about special consideration
Plagiarism:
Plagiarism is a form of cheating and it is very serious academic offence that may lead to expulsion from the University.
Please Refer: www.rmit.edu.au/academicintegrity to find more information about plagiarism.
Email Communication:
All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.
Course Overview: Access Course Overview