Course Title: Solve problems in d.c. circuits
Part B: Course Detail
Teaching Period: Term1 2018
Course Code: EEET7020C
Course Title: Solve problems in d.c. circuits
School: 174T School of VE Engineering, Health & Science
Campus: City Campus
Program: C6120 - Advanced Diploma of Engineering Technology - Electrical
Course Contact: Program Manager
Course Contact Phone: +61 3 9925 4468
Course Contact Email: vehs@rmit.edu.au
Name and Contact Details of All Other Relevant Staff
Kenneth Falzon
Ph: 9925 4716
Email: kenneth.falzon@rmit.edu.au
Dr. Gita Pendharkar
Ph:9925 4701
Email: gita.pendharkar@rmit.edu.au
Kemps Cheng
Ph:9925 4691
Email: kemps.cheng@rmit.edu.au
Sukhvir Judge
Ph: 9925 4470
Email: sukhvir.judge@rmit.edu.au
Nominal Hours: 80
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
UEENEEE101A
Course Description
This unit covers determining correct operation of single source d.c. series, parallel and series-parallel circuits and providing solutions as they apply to various electrotechnology work functions. It encompasses working safely, problem solving procedures, including the use of voltage, current and resistance measuring devices, providing solutions derived from measurements and calculations to predictable problems in single and multiple path circuits.
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title: |
UEENEEE104A Solve problems in d.c. circuits |
Element: |
1. Prepare to work on d.c. electrical circuits. |
Performance Criteria: |
1.1 OHS procedures for a given work area are identified, obtained and understood. 1.2 OHS risk control work preparation measures and procedures are followed. |
Element: |
2. Solve d.c. circuit problems. |
Performance Criteria: |
2.1 OHS risk control work measures and procedures are followed. |
Element: |
3. Complete work and document problem solving activities. |
Performance Criteria: |
3.1 OHS work completion risk control measures and procedures are followed. |
Learning Outcomes
Refer to Elements
Details of Learning Activities
You will be involved in the following learning activities to meet requirements for this competency and stage 1 competencies for Engineering Associates:
- Lectures
- Tutorials
- Practical laboratory
- Assignments
Engineer Australia Mapping Information:
This course is mapped against stage 1 competencies for Engineering Associates developed by Engineers Australia as detailed below:
EA 1. Knowledge and Skill Base
EA1.1. Descriptive, formula-based understanding of the underpinning natural and physical sciences and the engineering fundamentals applicable to the practice area.
EA 1.2. Procedural-level understanding of the mathematics, numerical analysis, statistics, and computer and information sciences which underpin the practice area.
EA 1.3. In depth practical knowledge and skills within specialist sub-disciplines of the practice area.
EA 1.4. Discernment of engineering developments within the practice area.
EA 1.5. Knowledge of contextual factors impacting the practice area.
EA 1.6. Understanding of the scope, principles, norms, accountabilities and bounds of contemporary engineering practice in the area of practice.
EA 2. Engineering Application Ability
EA 2.1. Application of established technical and practical methods to the solution of well-defined engineering problems.
EA 2.2. Application of technical and practical techniques, tools and resources to well defined engineering problems.
EA 2.3. Application of systematic synthesis and design processes to well defined engineering problems.
EA 2.4. Application of systematic project management processes.
EA 3. Professional and Personal Attributes
EA 3.1. Ethical conduct and professional accountability.
EA 3.2. Effective oral and written communication in professional and lay domains.
EA 3.3. Creative, innovative and pro-active demeanour.
EA 3.4. Professional use and management of information.
EA 3.5. Orderly management of self, and professional conduct.
EA 3.6. Effective team membership and team leadership.
Engineers Australia Stage 1 Competencies are mapped with competency UEENEEE104A in the Assessment Matrix.
Teaching Schedule
The proposed teaching schedule for this competency is detailed below:
Week | Topics Delivered |
Elements/ Performance Criteria |
1 | Introduction to course, course guide, assessments, topics breakdown, resources, equipment (in the lab) & OHS issues. Basic electrical concepts Electro technology industry. Production of electricity. Transmission and distribution systems of electricity. Utilisation of electricity by the various loads Basic calculations involving quantity of electricity, velocity and speed with relationship to the generation and transportation of electricity. |
E104A: 1.1, 1.2 |
2 | Basic electrical circuit |
E104A: 1.1 - 1.6, 2.1,2.2, 2.5, 2.6, 3.1, 3.2, 3.4 |
3 | Ohm’s Law Relationship between voltage, current and resistance from measured values in a simple circuit. Determining voltage, current and resistance in a circuit given any two of these quantities. Graphical relationships of voltage, current and resistance Lab # 1 (4%) |
E104A: 1.1, 1.2, 1.3, 2.1, 2.2, 2.5, 2.6, 3.1, 3.2, 3.4 |
4 | Electrical power |
E104A: 1.1, 1.2, 1.3, 2.1, 2.2, 2.5, 2.6, 3.1, 3.2, 3.4 |
5 | Effects of electrical current Effects of current. The fundamental principles (listed in AS/NZS 3000) for protection against the effects of current. Basic principles by which electric current can result in the production of heat; light; magnetic fields; and a chemical reaction. Typical uses of the effects of current. Lab # 2 (4%) |
E104A: 1.1, 1.2, 1.3, 2.1, 2.2, 2.5, 2.6, 3.1, 3.2, 3.4 |
6 | EMF sources energy sources and conversion electrical energy Basic principles of producing a emf from the interaction of a moving conductor in a magnetic field, from the heating of one junction of a thermocouple, by the application of sun light falling on the surface of photovoltaic cells, and when a mechanical force is applied to a crystal (piezo electric effect). Principles of producing a electrical current from primary, secondary and fuel cells. Input, output, efficiency or losses of electrical systems and machines Effect of losses in electrical wiring and machines. Principle of conservation of energy Lab # 2 (4%) |
E104A: 1.1, 1.2, 1.3, 2.1, 2.2, 2.5, 2.6, 3.1, 3.2, 3.4 |
7 | Resistors Features, identification, types and applications of fixed and variable resistors. Power ratings of a resistor. Power loss (heat) occurring in a conductor. Use the colour code table to identify resistors and confirm the value by measurement. Specifying a resistor for a particular application Lab # 3 (4%) |
E104A: 1.1, 1.2, 1.3, 2.1, 2.2, 2.5, 2.6, 3.1, 3.2, 3.4 |
8 | Series circuits Circuit diagram of a single-source d.c. ‘series’ circuit. Applications and characteristics of ‘series’ circuits used in the Electro technology industry. KVL and simple voltage divider networks. Effect of an open-circuit on a series connected circuit Lab # 3 (4%) |
E104A: 1.1, 1.2, 1.3, 2.1, 2.2, 2.5, 2.6, 3.1, 3.2, 3.4 |
9 |
Parallel circuits Catch up Lab |
E104A: 1.1, 1.2, 1.3, 2.1, 2.2, 2.5, 2.6, 3.1, 3.2, 3.4 |
10 |
Series/parallel circuits Schematic diagram of a single-source d.c. ‘series/parallel’ circuit. Applications and characteristics of ‘series/parallel’ circuits used in the Electrotechnology industry. Relationship between voltages, currents and resistances in a bridge network. Calculation of the total resistance, the voltage, current and power dissipated from measured values of any two of these quantities of a ‘series/parallel’ circuit. Lab # 4 (4%) |
E104A: 1.1, 1.2, 1.3, 2.1, 2.2, 2.5, 2.6, 3.1, 3.2, 3.4 |
11 | Factors affecting resistance Factors affect the resistance of a conductor (type of material, length, cross-sectional area and temperature) Effects of resistance on the current-carrying capacity and voltage drop in cables. Calculation of the resistance. Lab # 4 (4%)
|
E104A: 1.1, 1.2, 1.3, 2.1, 2.2, 2.5, 2.6, 3.1, 3.2, 3.4 |
12 |
Effects of meters in a circuit Assignment handed |
E104A: 1.1, 1.2, 1.3, 2.1, 2.2, 2.5, 2.6, 3.1, 3.2, 3.4 |
13 | Resistance measurement Identification of instruments used in the field to measure resistance. The purpose of an Insulation Resistance (IR) Tester calibration, storing and checking. Zero ohms adjustment, battery check function, scale and connecting leads). Reasons why the supply must be isolated prior to using the IR tester. The continuity test, insulation resistance test used in an electrical installation and AS/NZS3000 Wiring Rules requirements. The voltage ranges of an IR tester and where each range may be used. e.g. 250 V d.c, 500 V d.c and 1000 V d.c |
E104A: 1.1, 1.2, 1.3, 2.1, 2.2, 2.5, 2.6, 3.1, 3.2, 3.4 |
14 | Definition of capacitance, how a capacitor is charged. Units by which capacitance is measured. Capacitance voltage and charge. Behaviour of an RC series d.c. circuit Practical Test 20% |
E104A: 1.1, 1.2, 1.3, 2.1, 2.2, 2.5, 2.6, 3.1, 3.2, 3.4 |
15 |
Capacitors Practical Test 20% Assignment due (10 %) |
E104A: 1.1, 1.2, 1.3, 2.1, 2.2, 2.5, 2.6, 3.1, 3.2, 3.4 |
16 | Capacitors in Series and Parallel Capacitors connected in parallel calculating their equivalent capacitance. Effects on the total capacitance of capacitors connected in series |
E104A: 1.1, 1.2, 1.3, 2.1, 2.2, 2.5, 2.6, 3.1, 3.2, 3.4 |
17-18 | Final Written Test 50% |
Student directed hours involve completing activities such as reading online resources, assignments, individual student-teacher course related consultation. Students are required to self-study the learning materials and complete the assignment out of class activities for the scheduled non-teaching hours. The estimated time is 16 hours outside the class time.
Learning Resources
Prescribed Texts
Introductory Circuit Analysis |
References
Other Resources
Students will be able to access information and learning materials through myRMIT and may be provided with additional materials in class. List of relevant reference books, resources in the library and accessible Internet sites will be provided where possible. During the course, you will be directed to websites to enhance your knowledge and understanding of difficult concepts.
Resource materials will be available on my RMIT>Studies>EEET7020C
Overview of Assessment
The assessment is conducted in both theoretical and practical aspects of the course according to the performance criteria set in the National Training Package. Assessment may incorporate a variety of methods including written/oral activities and demonstration of practical skills to the relevant industry standards. Participants are advised that they are likely to be asked to personally demonstrate their assessment activities to their teacher/assessor. Feedback will be provided throughout the course. To successfully complete this course you will be required to demonstrate competency in each assessment task detailed under Assessment Tasks:
Assessment 1: Practical/Laboratories
Weighting towards final grade (%): 20
Assessment 2: Assignment
Weighting towards final grade (%): 10
Assessment 3: Practical Test
Weighting towards final grade (%): 20
Assessment 4: Final Written Test
Weighting towards final grade (%): 50
These tasks assesses the following Course Learning Outcomes (CLOs):
Assessment Mapping Matrix
Element/Performance Criteria Covered |
Assignment |
Lab |
Practical Test |
Final Written Test |
1.1 |
x |
x |
x |
x |
1.2 |
x |
x |
x |
x |
1.3 |
x |
x |
x |
x |
1.4 |
x |
x |
x |
x |
1.5 |
x |
x |
x |
x |
1.6 |
x |
x |
x |
x |
2.1 |
x |
x |
x |
x |
2.2 |
x |
x |
x |
x |
2.3 |
x |
x |
x |
x |
2.4 |
x |
x |
x |
x |
2.5 |
x |
x |
x |
x |
2.6 |
x |
x |
x |
x |
3.1 |
x |
x |
x |
x |
3.2 |
x |
x |
x |
x |
3.3 |
x |
x |
x |
x |
3.4 |
x |
x |
x |
x |
Assessment Tasks
Assessment 1: Practical/Laboratories (week 3-10)
Weighting towards final grade (%): 20%
Assessment 2: Assignment - Week 12- 15
Weighting towards final grade (%): 10%
Assessment 3: Practical test- Week 11
Weighting towards final grade (%): 20%
Assessment 4: Final Written Test - Week 17-18
Weighting towards final grade (%): 50%
This course is graded as Competent or Not Yet Competent and subsequently the following course grades are allocated:
80 - 100: CHD - Competent with High Distinction
70 - 79: CDI - Competent with Distinction
60 - 69: CC - Competent with Credit
50 - 59: CAG - Competency Achieved - Graded
0 - 49: NYC - Not Yet Competent
DNS - Did Not Submit for Assessment
Assessment Matrix
Assessment vs UEENEEE104A Elements & Performance Criteria
UEENEEE104A Elements & Performance Criteria | ||||||||||||||||
Assessments | 1.1 | 1.2 | 1.3 | 1.4 | 1.5 | 1.6 | 2.1 | 2.2 | 2.3 | 2.4 | 2.5 | 2.6 | 3.1 | 3.2 | 3.3 | 3.4 |
Assignment | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x |
Lab | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x |
Practical Test | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x |
Final Written Test | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x |
Assessment vs Engineers Australia Stage 1 Competencies
Engineers Australia Stage 1 Competencies | ||||||||||||||||
Assessments | EA1.1 | EA1.2 | EA1.3 | EA1.4 | EA1.5 | EA1.6 | EA2.1 | EA2.2 | EA2.3 | EA2.4 | EA3.1 | EA3.2 | EA3.3 | EA3.4 | EA3.5 | EA3.6 |
Assignment | X | X | X | X | X | X | X | X | X | |||||||
Lab | X | X | X | X | X | X | X | X | ||||||||
Practical Test | X | X | X | X | X | X | X | X | X | X | X | X | ||||
Final Written Test | X | X | X | X | ||||||||||||
All Assessments |
1 | 1 | 2 | 1 | 2 | 1 | 1 | 2 | 1 | 1 | 1 | 2 | 1 | 1 | 2 | 1 |
0 (Blank) | Graduate attribute is not assessed. | |||||||||||||||
1 | Graduate attribute is assessed in at least one, but less than one-third, of the Element | |||||||||||||||
2 | Graduate attribute is assessed in at least one third, but less than two-third, of the Element | |||||||||||||||
3 | Graduate attribute is assessed in more than two-third, of the Element |
Other Information
Credit Transfer and/or Recognition of Prior Learning (RPL):
You may be eligible for credit towards courses in your program if you have already met the learning/competency outcomes through previous learning and/or industry experience. To be eligible for credit towards a course, you must demonstrate that you have already completed learning and/or gained industry experience that is:
- Relevant
- Current
- Satisfies the learning/competency outcomes of the course
Please refer to http://www.rmit.edu.au/students/enrolment/credit to find more information about credit transfer and RPL
Study and learning Support:
Study and Learning Centre (SLC) provides free learning and academic development advice to you.
Services offered by SLC to support your numeracy and literacy skills are:
- assignment writing, thesis writing and study skills advice
- maths and science developmental support and advice
- English language development
Please Refer http://www.rmit.edu.au/studyandlearningcentre to find more information about Study and learning Support
Equitable Learning Services (ELS):
If you are suffering from long-term medical condition or disability, you should contact Equitable Learning Services (ELS) to seek advice and support to complete your studies.
Please refer to https://www.rmit.edu.au/students/support-and-facilities/student-support/equitable-learning-services to find more information about services offered by Equitable Learning Services (ELS).
Late submission:
If you require an Extension of Submittable Work (assignments, reports or project work etc.) for 7 calendar days or less (from the original due date) and have valid reasons, you must complete and lodge an Application for Extension of Submittable Work (7 Calendar Days or less) form and lodge it with the Senior Educator/ Program Manager.
The application must be lodged no later than one working day before the official due date. You will be notified within no more than 2 working days of the date of lodgment as to whether the extension has been granted.
If you seek an Extension of Submittable Work for more than 7 calendar days (from the original due date) must lodge an Application for Special Consideration form under the provisions of the Special Consideration Policy, preferably prior to, but no later than 2 working days after the official due date.
Submittable Work (assignments, reports or project work etc.) submitted late without approval of an extension will not be accepted or marked.
Special consideration:
Please Refer http://www.rmit.edu.au/students/specialconsideration to find more information about special consideration
Plagiarism:
Plagiarism is a form of cheating and it is very serious academic offence that may lead to expulsion from the University.
Please Refer: www.rmit.edu.au/academicintegrity to find more information about plagiarism.
Other Information:
All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.
Course Overview: Access Course Overview