Course Title: Explore and apply the creative design process to 3D forms
Part B: Course Detail
Teaching Period: Term2 2019
Course Code: GRAP6356C
Course Title: Explore and apply the creative design process to 3D forms
School: 320T Architecture & Urban Design
Campus: City Campus
Program: C5381 - Diploma of Visual Merchandising
Course Contact: Sam Falanga
Course Contact Phone: +61 3 99254670
Course Contact Email: samuel.falanga@rmit.edu.au
Name and Contact Details of All Other Relevant Staff
John Owe Young
email: john.owe-young@rmit.edu.au
Building 94.06.01
Telephone: 99254685
I will be on campus Monday to Thursday and will check my email every morning. I aim to respond as soon as possible.
Tim McCarthy
email: timothy.mccarthy@rmit.edu.au
Building 94.06.01
To make an appointment please email me. I will be checking my email regularly for this course
Nominal Hours: 50
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
None required.
Course Description
In this unit you will develop the skills and knowledge required to explore and creatively apply the design process to the development of three-dimensional (3D) forms. You will interpret specifications, design and construct three dimensional (3D) props for display, exhibition and event contexts. You will also research, practise and apply skills and techniques to produce a range of creative studio finishes/props applicable to these contexts.
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title: |
BSBDES303 Explore and apply the creative design process to 3D forms |
Element: |
1 Source information on 3D design |
Performance Criteria: |
1.1 Identify and access relevant sources of information on 3D design 1.2 Evaluate and collate information to build knowledge of 3D design |
Element: |
2 Explore the creative design process for 3D forms |
Performance Criteria: |
2.1 Use creative thinking techniques to generate a range of ideas and options 2.2 Use experimentation to explore and challenge a range of different ideas 2.3 Challenge assumptions, reflect on ideas and refine approaches 2.4 Consciously change perspective, and evaluate ideas and situations in new ways |
Element: |
3 Communicate concepts or ideas through application of design processes to 3D forms |
Performance Criteria: |
2.1 Use creative thinking techniques to generate a range of ideas and options 2.2 Use experimentation to explore and challenge a range of different ideas 2.3 Challenge assumptions, reflect on ideas and refine approaches 2.4 Consciously change perspective, and evaluate ideas and situations in new ways |
Learning Outcomes
On successful completion of this course, you will have developed and applied the skills and knowledge required to demonstrate your competency in the above elements.
Details of Learning Activities
The majority of the work will be occur face to face in the workshop classroom. You may need to conduct research and further work outside of scheduled class times.
Learning activities will take place in the workshop/class room using industry standard tools & resources. You will complete exercises & industry relevant projects. You will also be required to undertake independent study.
Most delivery will be face-to-face in the Studio workshop.
Teaching Schedule
Weekly Schedule*
* While great care has been taken in developing this weekly schedule, unforeseen circumstances may require adjustments to be made.
Week |
Class Activity |
1 |
Welcome Intro and overview of 3D Production. Skills Review. Projects discussion Intro Activity 1: Research and Present Examples of 3D Production Techniques Intro Activity 2: Research and present examples of 3D Design Techniques Intro Assessment A - 3D Production Process (including Activity 1: Research and Present Examples of 3D Production Techniques) |
2 |
Continue activity 1: Research and Present Examples of 3D Production Techniques & activity 1: Research and present examples of 3D Design Techniques Continue assessment A - 3D Production Process 3D Production support for Front Window if required |
3 |
Continue activity 1: Research and Present Examples of 3D Production Techniques & activity 1: Research and present examples of 3D Design Techniques Continue assessment A - 3D Production Process 3D Production support for Front Window if required * Work on Display 2, Event & Exhibition, Studio 2 Skills job as necessary: Antiquing, Marbling/Trompe, Laser cut, PopUp book |
4 |
Continue assessment A - 3D Production Process 3D Production support for Front Window if required |
5 |
Continue assessment A - 3D Production Process 3D Production support for Front Window if required |
6 |
Continue assessment A - 3D Production Process 3D Production activities for Front Window 2 |
7 |
Continue assessment A - 3D Production Process 3D Production activities for Front Window 2 |
8 |
Submit assessment A - 3D Production Process (including Activity 1: Research and Present Examples of 3D Production Techniques) 3D Production activities for Front Window 2* Work on Display 2, Event & Exhibition, Studio 2 Skills job as necessary: Antiquing, Marbling/Trompe, Laser cut, PopUp book |
9 |
Intro Assessment B - 3D Design Process including activity 1: Research and present examples of 3D Design Techniques (used to create 3D objects) 3D Production activities for Front Window 2 |
10 |
Continue Assessment B - 3D Design Process 3D Production activities for Front Window 2 |
SEPTEMBER BREAK 16th september to 27th September |
|
11 |
Continue Assessment B - 3D Design Process 3D Production activities for Front Window 2 |
12 |
Continue Assessment B - 3D Design Process 3D Production activities for Front Window 2 |
13 |
Continue Assessment B - 3D Design Process 3D Production activities for Front Window 2 |
14 |
Continue Assessment B - 3D Design Process 3D Production activities for Front Window 2 |
15 |
Continue Assessment B - 3D Design Process 3D Production activities for Front Window 2 |
16 |
Submit Assessment B - 3D Design Process - including activity 1: Research and present examples of 3D Design Techniques (used to create 3D objects) Finalise & submit all work. Upload images & documentation onto specified Drive & include a completed work submission form. |
Learning Resources
Prescribed Texts
References
Other Resources
The studio workshop has induction handouts available
There are no compulsory prescribed texts in this course, however you may find the following resources useful.
https://www.youtube.com/watch?v=Z4lnuO7KDys
https://primo-direct-apac.hosted.exlibrisgroup.com/permalink/f/gtkogo/RMIT_ALMA51193497940001341
Snowflakes, sunbursts, and stars : 75 exquisite paper designs to fold, cut, and curl Swanston Library 745.54 B864
You are advised to look at the Canvas Learning Hub at myRMIT site for ongoing updated information. A range of learning resources and references are provided throughout the year.
RMIT will provide you with resources and tools for learning in this course through our online systems and access to specialised facilities and relevant software. You will also have access to the library resources.
Amongst the library’s electronic resources is the ability to access Lynda.com for online tutorials and lessons. You may be given these tutorials (and other resources) to supplement your classroom learning. The University Library has extensive resources for Visual Merchandising students. The Library has produced a subject guide that includes quality online and print resources for your studies.
http://rmit.libguides.com/visualmerchandising The Library provides guides on academic referencing
http://www.rmit.edu.au/library/referencing and subject specialist help via your Liaison Librarian
http://www.rmit.edu.au/library/librarians/dsc
Overview of Assessment
Assessment is on-going throughout the course. Assessment will incorporate a range of methods. This may include practical, hands on making, demonstration of skills and knowledge, successful completion of design and fabrication/construction tasks. This may also include oral questioning on methods and procedures.
The RMIT assessment charter summarises your responsibilities as a student as well as those of your teachers.
Assessment Tasks
To demonstrate competency in this course you need to submit each one of the following pieces of assessment to a satisfactory standard.
Assessment A - 3D Production Process (including Activity 1: Research and Present Examples of 3D Production Techniques) Due Week 8
Assessment B - 3D Design Process including activity 1: Research and present examples of 3D Design Techniques (used to create 3D objects) Due Week 16
Competency based assessment
You are required to demonstrate all learning outcomes to a satisfactory standard.
You will receive feedback with verbal and/or written evaluation of your progress within class time.
The submitted projects will be assessed with written feedback as well as a checklist that relates to separate components of the project and the overall outcome.
At the completion of the course, grading will be offered in addition to, and after, competency based assessment.
Grades which apply to courses delivered in accordance with competency based assessment, but which also use graded assessment are:
CHD Competent with High Distinction
CDI Competent with Distinction
CC Competent with Credit
CAG Competency Achieved Graded
NYC Not Yet Competent
DNS Did Not Submit for Assessment
Assessment Matrix
The assessment matrix demonstrates alignment of assessment tasks with the relevant Unit of Competency. These are available from the course contact person (stated above).
Other Information
Attendance
The major learning experience involves studio based exercises, demonstration and production. It is strongly advised that you attend all sessions in order to engage in the required learning activities, ensuring the maximum opportunity to gain the competency.
Feedback - You will receive verbal and written feedback by teacher on your work. This feedback also includes suggestions on how you can proceed to the next stage of developing your projects.
Student feedback at RMIT
Student Progress
Monitoring academic progress is an important enabling and proactive strategy to assist you to achieve your learning potential. Student progress policy
Special Consideration Policy, Late Submission & Extensions
All assessment tasks are required to be completed to a satisfactory level.
If you are unable to complete any piece of assessment by the due date, you will need to apply for an extension.
Pick the following link for details on applying for Special consideration
Any student seeking an extension, should aim at doing so a minimum of 2 days before the deadline. Work submitted late and without an extension at any point will incur late penalties in accordance with university policy.
If you require an extension you must complete an extension form with evidence supporting your application and hand this to your instructor. Further links - Application for extension of time
On Time Submission and Impact of Late Submission
On time submission is an important factor in your assessment. Employability skills are embedded in all courses and these include Planning & Organising and Self-management. For this reason, late work impacts on your competency assessment.
Submissions that are assessed as Not Satisfactory can be re-submitted once and this is only permitted during the period that the competency is scheduled.
Cover Sheet for Submissions
You must complete a submission cover sheet for every piece of submitted work. This signed sheet acknowledges that you are aware of the plagiarism implications. Submission cover sheet
Academic Integrity and Plagiarism - RMIT University has a strict policy on plagiarism and academic integrity. Please refer to the website for more information on this policy go to Academic Integrity
Your safety and the safety of others is of the utmost importance.
Classes are conducted in a workshop environment with materials, tools and equipment that may be hazardous or may cause injury. Students must observe OHS (Occupational Health & Safety) and WHS (Workplace Health Safety) requirements at all times. Students are ensure that they wear clothing appropriate for this environment - no loose fitting clothing or jewellery and long hair is to be tied back. Shoes MUST cover the entire foot - no sandals or thongs permitted.
No headphones, ear buds etc., are to be used in the studio workshop area.
Where appropriate or directed by staff, students must use PPE (Personal Protective Equipment) in the workshop area.
Students shall only use tools and equipment for which they have received the appropriate training and for which they have been logged.
Students not meeting these requirements will be not be allowed access to the workshop and display areas and will be basked to leave.
Course Overview: Access Course Overview