Course Title: Use advanced computational processes to provide solutions to energy sector engineering problems
Part B: Course Detail
Teaching Period: Term1 2023
Course Code: EEET7443C
Course Title: Use advanced computational processes to provide solutions to energy sector engineering problems
Important Information:
Please note that this course may have compulsory in-person attendance requirements for some teaching activities.
To participate in any RMIT course in-person activities or assessment, you will need to comply with RMIT vaccination requirements which are applicable during the duration of the course. This RMIT requirement includes being vaccinated against COVID-19 or holding a valid medical exemption.
Please read this RMIT Enrolment Procedure as it has important information regarding COVID vaccination and your study at RMIT: https://policies.rmit.edu.au/document/view.php?id=209.
Please read the Student website for additional requirements of in-person attendance: https://www.rmit.edu.au/covid/coming-to-campus
Please check your Canvas course shell closer to when the course starts to see if this course requires mandatory in-person attendance. The delivery method of the course might have to change quickly in response to changes in the local state/national directive regarding in-person course attendance.
School: 520T Future Technologies
Campus: City Campus
Program: C6178 - Advanced Diploma of Electronics and Communications Engineering
Course Contact: Munir Muniruzzaman
Course Contact Phone: +61 3 9925 4415
Course Contact Email: Munir.Muniruzzaman@rmit.edu.au
Name and Contact Details of All Other Relevant Staff
Dr Elmas Aliu
Teacher
Ph: +61 3 9925 4360
Email:
Appointment by email
Email: elmas.aliu@rmit.edu.au
Nominal Hours: 120
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
Pre-requisite units:
- UEECD0007 - Apply work health and safety regulations, code and practices in the workplace
- UEECD0039 - Provide solutions to basic engineering computation problems
Course Description
In this course you will acquire the skills and knowledge required to use advanced computational processes to provide solutions to energy sector engineering problems. This will include learning how to:
- provide solutions to energy sector engineering problems
- apply problem-solving techniques
- use a range of advanced mathematical processes
- provide soltuions to problems
- complete documentation
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title: |
UEECD0049 Use advanced computational processes to provide solutions to energy sector engineering problems |
Element: |
1. Provide solutions to engineering problems |
Performance Criteria: |
1.1 Work health and safety (WHS)/occupational health and safety (OHS) processes and workplace procedures for a given work area are identified, obtained and applied 1.2 Scope of problems are obtained from documentation and/or work instruction to solve problems 1.3 Problems are documented and/or provided in diagrammatic form and appropriate methods identified to resolve them 1.4 Constants and variables to problems are obtained from measured values and/or problem documentation 1.5 Alternative methods for resolving problems are reviewed and, as required, discussed with relevant person/s 1.6 Problems are resolved using mathematical processes in accordance with workplace procedures |
Element: |
2. Complete work and documentation |
Performance Criteria: |
2.1 Justification for solutions used to solve engineering problems is documented in work records in accordance with workplace procedures and relevant industry standards 2.2 Work completion is documented, and relevant person/s notified in accordance with workplace procedures |
Learning Outcomes
On successful completion of this course you will have developed and applied the skills and knowledge required to demonstrate competency in the above elements
Details of Learning Activities
Engineers Australia Mapping Information:
This course is mapped against stage 1 competencies for Engineering Associates developed by Engineers Australia as detailed below:
EA 1. Knowledge and Skill Base
EA 1.1. Descriptive, formula-based understanding of the underpinning natural and physical sciences and the engineering fundamentals applicable to the practice area.
EA 1.2. Procedural-level understanding of the mathematics, numerical analysis, statistics, and computer and information sciences which underpin the practice area.
EA 1.3. In depth practical knowledge and skills within specialist sub-disciplines of the practice area.
EA 1.4. Discernment of engineering developments within the practice area.
EA 1.5. Knowledge of contextual factors impacting the practice area.
EA 1.6. Understanding of the scope, principles, norms, accountabilities and bounds of contemporary engineering practice in the area of practice.
EA 2. Engineering Application Ability
EA 2.1. Application of established technical and practical methods to the solution of well-defined engineering problems.
EA 2.2. Application of technical and practical techniques, tools and resources to well defined engineering problems.
EA 2.3. Application of systematic synthesis and design processes to well defined engineering problems.
EA 2.4. Application of systematic project management processes.
EA 3. Professional and Personal Attributes
EA 3.1. Ethical conduct and professional accountability.
EA 3.2. Effective oral and written communication in professional and lay domains.
EA 3.3. Creative, innovative and pro-active demeanour.
EA 3.4. Professional use and management of information.
EA 3.5. Orderly management of self, and professional conduct.
EA 3.6. Effective team membership and team leadership.
Engineers Australia Stage 1 Competencies are mapped with competency UEECD0007 in the Assessment Matrix.
Teaching Schedule
Week |
Class content (topics) |
Unit of competency and Performance criteria |
Assessments |
Week 1 |
WHS/OHS requirements Hazard Identification Risk Assessment Risk Mitigation Safety & Well-being WHS/OHS Documentation |
UEEC0049_1.1 Work health and safety (WHS)/occupational health and safety (OHS) processes and workplace procedures for a given work area are identified, obtained and applied UEEC0049_2.1 Justification for solutions used to solve engineering problems is documented in work records in accordance with workplace procedures and relevant industry standards |
|
Week 2 |
Vector Product (cross product) Properties of vector product |
UEEC0049_1.3 Problems are documented and/or provided in diagrammatic form and appropriate methods identified to resolve them
|
|
Week 3 |
Linear Algebra Solving systems of linear equations (3x3) Using: The inverse matrix Gaussian elimination |
UEEC0049_1.2 Scope of problems are obtained from documentation and/or work instruction to solve problems |
|
Week 4 |
Differential Calculus: Definition of differentiation Table and linearity Product rule of differentiation Quotient rule of differentiation |
UEEC0049_1.4 Constants and variables to problems are obtained from measured values and/or problem documentation |
|
Week 5 |
Differential Calculus: The chain rule of differentiation Logarithmic differentiation Higher order derivatives
|
UEEC0049_1.5 Alternative methods for resolving problems are reviewed and, as required, discussed with relevant person/s |
|
Week 6 |
Differential Calculus: Implicit differentiation Application of differentiation |
UEEC0049_1.6 Problems are resolved using mathematical processes in accordance with workplace procedures UEEC0049_2.2 Work completion is documented and relevant person/s notified in accordance with workplace procedures |
|
Week 7 |
Definition of integration Definite integral Application of definite integration |
UEEC0049_1.2 Scope of problems are obtained from documentation and/or work instruction to solve problems |
|
Week 8 |
Integration by substitution Integration by parts |
UEEC0049_1.2 Scope of problems are obtained from documentation and/or work instruction to solve problems |
Test 1 |
Week 9 |
Integration using partial fractions |
UEEC0049_1.3 Problems are documented and/or provided in diagrammatic form and appropriate methods identified to resolve them |
|
Week 10 |
Arithmetic Sequences Geometric Sequences Sums of Arithmetic and Geometric Sequences |
UEEC0049_1.4 Constants and variables to problems are obtained from measured values and/or problem documentation |
|
Week 11 |
Basic concepts of differential equations First order separable differential equations First order linear differential equations |
UEEC0049_1.5 Alternative methods for resolving problems are reviewed and, as required, discussed with relevant person/s |
|
Week 12 |
Second order linear with constant coefficients differential equations Application of differential equations |
UEEC0049_1.6 Problems are resolved using mathematical processes in accordance with workplace procedures UEEC0049_2.2 Work completion is documented and relevant person/s notified in accordance with workplace procedures |
|
Week 13 |
Discrete data Continuous data The arithmetic mean Calculating the mean of a frequency distribution |
UEEC0049_1.2 Scope of problems are obtained from documentation and/or work instruction to solve problems |
|
Week 14 |
The median The mode Variation of data |
UEEC0049_2.1 Justification for solutions used to solve engineering problems is documented in work records in accordance with workplace procedures and relevant industry standards |
|
Week 15 |
Revision: integral calculus problem-solving techniques sequences and series numbers differential equations relevant industry standards |
UEEC0049_1.2 Scope of problems are obtained from documentation and/or work instruction to solve problems UEEC0049_1.3 Problems are documented and/or provided in diagrammatic form and appropriate methods identified to resolve them UEEC0049_1.6 Problems are resolved using mathematical processes in accordance with workplace procedures |
|
Week 16 |
Revision: Second order linear with constant coefficients differential equations Discrete data Continuous data The arithmetic mean Calculating the mean of a frequency distribution The median The mode Variation of data |
UEEC0049_1.2 Scope of problems are obtained from documentation and/or work instruction to solve problems UEEC0049_1.3 Problems are documented and/or provided in diagrammatic form and appropriate methods identified to resolve them UEEC0049_1.6 Problems are resolved using mathematical processes in accordance with workplace procedures |
Practice Test 2 |
Week 17 |
Assessment |
UEEC0049_1.2 Scope of problems are obtained from documentation and/or work instruction to solve problems UEEC0049_1.3 Problems are documented and/or provided in diagrammatic form and appropriate methods identified to resolve them UEEC0049_1.6 Problems are resolved using mathematical processes in accordance with workplace procedures |
Test 2
|
Week 18 |
Assessment / Resubmission |
UEEC0049_1.2 Scope of problems are obtained from documentation and/or work instruction to solve problems UEEC0049_1.3 Problems are documented and/or provided in diagrammatic form and appropriate methods identified to resolve them UEEC0049_1.6 Problems are resolved using mathematical processes in accordance with workplace procedures |
Assessment Resubmission |
Learning Resources
Prescribed Texts
References
Mathematics for Engineers, J. Bird, 9th Edition |
9780367643782 |
Croft A, Davidson R, Mathematics for Engineers, fifth edition, Pearson Education Australia |
9781292253640 |
Other Resources
Students will be able to access information and learning materials through Canvas>Your Cluster name of the course and may be provided with additional materials in class.
List of relevant recommended books, resources in the library and accessible Internet sites will be provided where possible.
During the course, you will be directed to websites to enhance your knowledge and understanding of difficult concepts.
The University Library has extensive resources and provides subject specialist expertise, research advice, help with referencing and support through:
The Learning Lab
https://www.rmit.edu.au/students/study-support/learning-lab
The Study Support Hub
https://www.rmit.edu.au/students/study-support/study-support-hub
Overview of Assessment
Assessment for this course is ongoing throughout the semester. Your knowledge and understanding of course content is assessed through participation in class exercises, oral/written presentations and through the application of learned skills and insights. Full assessment briefs will be provided and can be found on CANVAS
Assessment Tasks
The assessment is conducted in both theoretical and practical aspects of the course according to the performance criteria set in the National Training Package. Assessment may incorporate a variety of methods including written/oral activities and demonstration of practical skills to the relevant industry standards. Participants are advised that they are likely to be asked to personally demonstrate their assessment activities to their teacher/assessor. Feedback will be provided throughout the course. To successfully complete this course you will be required to demonstrate competency in each assessment task detailed under Assessment Tasks:
Assessment 1: Assignment
Assessment 3: Closed Book Test 1
Assessment 4: Closed Book Final Test
Students enrolled in Vocational Education and Training qualifications are assessed for ‘Competency’. To be assessed as ‘Competent’ means you have consistently demonstrated the required knowledge and skills to a standard expected in the workplace. To be assessed as Competent in a course, students will need to complete each assessment task to a satisfactory standard.
Results that apply to courses that are delivered and assessed in accordance with competency-based assessments are:
• CA - Competency Achieved
• NYC - Not Yet Competent
• DNS - Did not submit for assessment.
Assessment Matrix
Element/Performance Criteria Covered | Assignment Part A | Assignment Part B | Test 1 | Test 2 |
1.1 | x | x | ||
1.2 | x | x | x | x |
1.3 | x | x | ||
1.4 | x | x | x | |
1.5 | x | x | x | x |
1.6 | x | x | ||
2.1 | x | x | x | x |
2.2 | x | x | x |
Other Information
Attendance:
Your learning experience will involve class-based teaching, discussion, demonstration and practical exercises
It is strongly advised that you attend all timetabled sessions. This will allow you to engage in the required learning activities, ensuring you the maximum opportunity to complete this course successfully.
Information about your studies:
You can access My Course through the RMIT website for information about timetables, important dates, assessment dates, results and progress, Canvas etc.
https://www.rmit.edu.au/students
Assessment:
Information on assessment including Special consideration, Adjustments to assessment, (eg. applying for an extension of time):
https://www.rmit.edu.au/students/student-essentials/assessment-and-exams/assessment
Academic Integrity and Plagiarism:
RMIT University has a strict policy on plagiarism and academic integrity. Please refer to the website for more information on this policy.
https://www.rmit.edu.au/students/student-essentials/assessment-and-exams/academic-integrity
Credit Transfer and Recognition of Prior Learning:
Credit transfer is the recognition of previously completed formal learning (an officially accredited qualification).
Recognition of Prior Learning (RPL) is an assessment process that allows you to demonstrate competence using the skills you have gained through experience in the workplace, voluntary work, informal or formal training or other life experiences.
Please speak to your teacher if you wish to discuss applying for Credit Transfer or RPL for the unit(s) of competency addressed in this course.
https://www.rmit.edu.au/students/student-essentials/enrolment/apply-for-creditt
Equitable Learning Services (ELS):
If you are suffering from long-term medical condition or disability, you should contact Equitable Learning Services (ELS) to seek advice and support to complete your studies.
Please refer to https://www.rmit.edu.au/students/support-and-facilities/student-support/equitable-learning-services
to find more information about services offered by Equitable Learning Services (ELS).
All email communications will be sent to your RMIT email address and you must regularly check your RMIT emails.
Course Overview: Access Course Overview