Course Title: Apply electronic systems to textile design and production
Part B: Course Detail
Teaching Period: Term1 2021
Course Code: ISYS7575C
Course Title: Apply electronic systems to textile design and production
School: 375T Vocational Design and Social Context
Campus: Brunswick Campus
Program: C6165 - Advanced Diploma of Textile Design and Development
Course Contact: Betty Kanzurovski
Course Contact Phone: +61 3 99259232
Course Contact Email: betty.kanzurovski@rmit.edu.au
Name and Contact Details of All Other Relevant Staff
Rachel Halton
Amanda Farncomb
Nominal Hours: 80
Regardless of the mode of delivery, represent a guide to the relative teaching time and student effort required to successfully achieve a particular competency/module. This may include not only scheduled classes or workplace visits but also the amount of effort required to undertake, evaluate and complete all assessment requirements, including any non-classroom activities.
Pre-requisites and Co-requisites
MSTTD5007 (ISYS7574C)Develop textile designs using computer-based design programs
Course Description
In this course you will explore the diverse application of computer-based design programs that enable technical and accurate reproduction of your design ideas. You will use the software to assist you in the development of design specifications, patterns and apply checking and calculation tools embedded in the software to assist you in the efficient and accurate development of textile designs.
Using a full range of the tools available in the software packages will allow you to develop intricate textile designs with multiple features.
The learning for this unit is contextualised for electronic systems that are used when creating, either, printed, knitted or woven textiles.
National Codes, Titles, Elements and Performance Criteria
National Element Code & Title: |
MSTTD6002 Apply electronic systems to textile design and production |
Element: |
1 Determine job requirements |
Performance Criteria: |
1.1 Follow standard operating procedures (SOPs) 1.2 Comply with work health and safety (WHS) requirements at all times 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions |
Element: |
2 Prepare to apply electronic systems to design and production |
Performance Criteria: |
2.1 Interpret design brief to determine design criteria 2.2 Research trends, themes and influences in textile design and evaluate in line with brief 2.3 Evaluate complexity of design in terms of intricacy and range of features 2.4 Set up workstation according to workplace procedures, and create preliminary design concept images using relevant electronic system 2.5 Develop design concept using computer-aided design (CAD) system |
Element: |
3.Present and confirm design |
Performance Criteria: |
3.1 Produce design image output that accurately documents intricate design features, scale and dimension and incorporates design elements 3.2 Produce storyboards and present using CAD processes 3.3 Present design to client or appropriate personnel for review and make modifications |
Element: |
4. Determine design specifications and machine settings |
Performance Criteria: |
4.1 Calculate yarn and material requirements for design draft using CAD system 4.2 Confirm specifications in line with textile design requirements and save 4.3 Produce patterns 4.4 Calculate machine settings and calibrate with direct interface to textile production machinery, where appropriate |
Element: |
5. Finalise design |
Performance Criteria: |
5.1 Confirm design and specifications with client or production personnel and save modifications, where necessary 5.2 Finalise and save production plans and specifications 5.3 Save final design and specifications as hard copy and incorporate into digital folio |
Learning Outcomes
On successful completion of this course you will have developed and applied the skills and knowledge required to demonstrate you are competent when using electronic systems and computer-aided design (CAD) processes to produce a range of textile designs. The designs will consist of a combination of intricate design features, scale and dimension. You will use the Electronic systems and CAD from the initial design development stage through to the presentation of finished storyboards and technical information as stated in your work brief.
Details of Learning Activities
The learning mode for this course will be a blended delivery, of online and face to face.
Learning activities in the course include:
- class exercises
- practical demonstrations
- in studio design activities / projects research
- independent project based work
Teaching Schedule
Week |
Class Activities |
|
1 |
Introduction to projects and assessment criteria. Assessment 1: Print Design Folio Assessment 3: Design Review (Observation) Illustrator - Drawing tools / Brush & Eraser Tools
|
|
2 |
Photoshop - Refining a scan / hand drawn line motif Illustrator - Image Trace |
|
3 |
Photoshop - Creating brushes / Gradients / Half tone effects
|
|
4 |
Illustrator Repeats & Pattern fill |
|
5 |
Photoshop and Illustrator - Colour overlapping / Screen Separation
|
|
6 |
Preparing artwork for printing / Creating cut through lines |
|
7 |
Draping and Refining elements for Outcome Board
|
|
8 |
Assessment 1 Due: Print Design Folio
|
|
9 |
Assessment 2: Weave Design Folio Introduction to Jacquard Design Software (Scotweave) & Jacquard Loom types. Software introduction and tutorial - Creating Jacquard Base weaves. |
|
10 |
Artwork Designer - Import Files, Refine Artwork, Manage Artwork Colours, managing scale of artwork |
|
11 |
Jacquard Designer. Main concepts, Assigning Base Weaves, managing float sizes, redefine artwork, |
|
12 |
Design for Jacquard – Design development - exploring different base weaves for main design. Modify, Edit & Refine designs to suit loom specifications. |
|
13 |
Creating jacquard loom cards (creating disk ready for output) Archiving & Saving files for Jacquard Loom Control. Technical File, Specification Sheets & Jacquard Simulation. |
|
14 |
Design modifications and Yarn selection, sampling & preparation for weaving. Output design files to Jacquard Loom. |
|
15 |
Assessment 2 Due: Weave Design Folio Assessment 3 Due: Design Review
|
|
16 |
ASSESSMENT FEEDBACK |
Learning Resources
Prescribed Texts
References
Other Resources
USB stick
Portable Hard Drive
Calculator
Pen / Notepad
A4 Folder / clean plastic inserts
Overview of Assessment
This course is assessed in accordance with competency-based assessment. To demonstrate competency in this course you will need to complete all the assessment to a satisfactory standard.
You will receive feedback from the teacher at the conclusion of each assessment task.
Competency is achieved only if competency has been demonstrated within the standard enrolment period. Students are advised that they may be asked to personally demonstrate their assessment work to confirm aspects of competency not evidenced in class or through assessments.
Results for this course are delivered and assessed in accordance with competency-based assessment are:
CA: Competency Achieved
NYC: Not Yet Competent
DNS: Did not Submit for Assessment
If you have a long term medical condition and/or disability it may be possible to negotiate to vary aspects of the learning or assessment methods. You can contact the program coordinator or Equitable Learning Services if you would like to find out more.
https://www.rmit.edu.au/students/support-and-facilities/student-support/equitable-learning-services
Your course assessment conforms to RMIT assessment principles, regulations, policies, procedures and instructions which are available for review online:
https://www.rmit.edu.au/students/student-essentials/assessment-and-exams/assessment
Assessment Tasks
There are 3 Assessment Tasks for this Course:
Assessment 1: Print Design Folio
Assessment 2: Weave Design Folio
Assessment 3: Design Review
Assessment Matrix
The assessment matrix demonstrates alignment of assessment tasks with the relevant unit of competency. These matrices are available through the Program Administration
Other Information
Please refer to the RMIT student page for extensive information about study support, assessment, extensions, appeals and a range of other matters: https://www.rmit.edu.au/students
Cover Sheet for Submissions:
You must complete and sign a submission cover sheet for every piece of submitted work
https://www.rmit.edu.au/students/student-essentials/forms/assessment-forms
Attendance:
Your learning experience will involve class-based teaching, discussion, demonstration and practical exercises
It is strongly advised that you attend all timetabled sessions. This will allow you to engage in the required learning activities, ensuring you the maximum opportunity to complete this course successfully.
Assessment Feedback:
You will receive spoken and written feedback on all your work. Where relevant, this feedback will also include suggestions on how you can proceed to the next stage of developing your projects.
Student Progress:
Monitoring academic progress is an important enabling and proactive strategy designed to assist you in achieving your learning potential.
https://www.rmit.edu.au/students/student-essentials/assessment-and-exams/academic-progress
Adjustments to Assessment (eg. applying for an extension of time):
If you are unable to complete any piece of assessment satisfactorily by the due date, you can choose to apply for an adjustment to your assessment. RMIT University offers a range of adjustments designed to support you in your studies, including an extension of time to complete the assessment.
Academic Integrity and Plagiarism:
RMIT University has a strict policy on plagiarism and academic integrity. Please refer to the website for more information on this policy.
https://www.rmit.edu.au/students/student-essentials/assessment-and-exams/academic-integrity
Credit Transfer and Recognition of Prior Learning:
Credit transfer is the recognition of previously completed formal learning (an officially accredited qualification).
Recognition of Prior Learning (RPL) is an assessment process that allows you to demonstrate competence using the skills you have gained through experience in the workplace, voluntary work, informal or formal training or other life experiences.
Recognition of Current Competency (RCC) RCC applies only if you have previously successfully demonstrated competence in a unit of competency, and now requires to be reassessed to ensure that the competence is being maintained.
Please speak to your teacher if you wish to discuss applying for Credit Transfer, RPL, or RCC for the unit(s) of competency addressed in this course.
https://www.rmit.edu.au/students/student-essentials/enrolment/apply-for-credit
Course Overview: Access Course Overview