Cement-free concrete beats corrosion and gives fatbergs the flush

Researchers from RMIT University have developed an eco-friendly zero-cement concrete, which all but eliminates corrosion.

Concrete corrosion and fatbergs plague sewage systems around the world, leading to costly and disruptive maintenance.

But now RMIT engineers have developed concrete that can withstand the corrosive acidic environment found in sewage pipes, while greatly reducing residual lime that leaches out, contributing to fatbergs.

Fatbergs are gross globs of congealed mass clogging sewers with fat, grease, oil and non-biodegradable junk like wet wipes and nappies, some growing to be 200 metres long and weighing tonnes.

Billion-dollar savings

These build-ups of fat, oil and grease in sewers and pipelines, as well as general corrosion over time, costs billions in repairs and replacement pipes.

The RMIT researchers, led by Dr Rajeev Roychand, created a concrete that eliminates free lime – a chemical compound that promotes corrosion and fatbergs.

Roychand said the solution is more durable than ordinary Portland cement, making it perfect for use in major infrastructure, such as sewage drainage pipes.

“The world’s concrete sewage pipes have suffered durability issues for too long,” Roychand said.

“Until now, there was a large research gap in developing eco-friendly material to protect sewers from corrosion and fatbergs.

“But we’ve created concrete that’s protective, strong and environmental – the perfect trio.”

Highly corroded ordinary Portland cement concrete compared to zero cement concrete.

Left: Highly corroded ordinary Portland cement concrete. Right: Zero cement concrete.

The perfect blend

By-products of the manufacturing industry are key ingredients of the cement-less concrete – a zero cement composite of nano-silica, fly-ash, slag and hydrated lime.

Not only does their concrete use large volumes of industrial by-products, supporting a circular economy, it surpasses sewage pipe strength standards set by ASTM International.

“Though ordinary Portland cement is widely used in the fast-paced construction industry, it poses long term durability issues in some of its applications,” Roychand said.

“We found making concrete out of this composite blend – rather than cement – significantly improved longevity.”

Fatberg on display in the Melbourne Museum. Photo: Museums Victoria, Photographer: Rob Zugaro.

Sustainable benefits

Replacing underground concrete pipes is a tedious task, ripping up the ground is expensive and often has a ripple effect of prolonged traffic delays and neighbourhood nuisances.

The Water Services Association of Australia estimates maintaining sewage networks costs $15 million each year, billions worldwide.

The environmental cost is greater – ordinary Portland cement accounts for about 5% of the world’s greenhouse gas emissions.

However, the RMIT study has proven certain by-products can be up to the job, replacing cement and able to withstand the high acidity of sewage pipes.

“Our zero-cement concrete achieves multiple benefits: it’s environmentally friendly, reduces concrete corrosion by 96% and totally eliminates residual lime that is instrumental in the formation of fatbergs,” Roychand said.

“With further development, our zero-cement concrete could be made totally resistant to acid corrosion.”

Roychand and his team are looking to collaborate with manufacturers and government to develop more applications for their zero-cement concrete.

‘Development of zero cement composite for the protection of concrete sewage pipes from corrosion and fatbergs’ is published in Resources, Conservation & Recycling (DOI: 10.1016/j.resconrec.2020.105166)

Story: Aeden Ratcliffe

Return to RMIT News

Society and Environment

Technology

28 September 2020

Society and Environment

Technology

28 September 2020

Sustainability
Research
Engineering
Property & Construction

Engage

Related News

Ultrathin nanotech promises to help tackle antibiotic resistance

Researchers have invented a nano-thin superbug-slaying material that could one day be integrated into wound dressings and implants to prevent or heal bacterial infections.

Recycled roads pave the way to a sustainable future

New roads mixed with recycled plastics at 10 sites across Victoria will demonstrate a viable circular-economy solution to the nation, experts say.

Homegrown research team to put plants on the Moon

A bold plan to grow seedlings on the Moon by 2026 has been funded by the Australian Government, in what could reveal a greater understanding of horticulture in extreme environments.

news-rmit-lead-researchers-printed-titanium-alloy-1220px.jpg

New ‘designer’ titanium alloys made using 3D printing

A team of researchers has created a new class of titanium alloys that are strong and not brittle under tension, by integrating alloy and 3D-printing process designs.

Acknowledgement of Country

RMIT University acknowledges the people of the Woi wurrung and Boon wurrung language groups of the eastern Kulin Nation on whose unceded lands we conduct the business of the University. RMIT University respectfully acknowledges their Ancestors and Elders, past and present. RMIT also acknowledges the Traditional Custodians and their Ancestors of the lands and waters across Australia where we conduct our business - Artwork 'Luwaytini' by Mark Cleaver, Palawa.

More information

Cement-free concrete beats corrosion and gives fatbergs the flush