Bacteria-shredding insect wings inspire new antibacterial packaging

Bacteria-shredding insect wings inspire new antibacterial packaging

Inspired by the bacteria-killing wings of insects like cicadas, scientists have developed a natural antibacterial texture for use on food packaging to improve shelf life and reduce waste.

Key points:

  • Antibacterial texturing kills bacteria, extending food’s shelf life.
  • Comes amid huge demand to improve the lifespan of food products, particularly for export.
  • Texture can be scaled up for mass production.

The lab-made nanotexture from an Australian-Japanese team of scientists kills up to 70% of bacteria and retains its effectiveness when transferred to plastic.

More than 30% of food produced for human consumption becomes waste, with entire shipments rejected if bacterial growth is detected.

The research sets the scene for significantly reducing waste, particularly in meat and dairy exports, as well as extending the shelf life and improving the quality, safety and integrity of packaged food on an industrial scale.

Group photo of researchers in lab wearing white lab coats.Multifunctional Mechano-biocidal Materials Research Group: Denver Linklater, Phuc Le, Elena Ivanova, Arturo Aburto-Medina, Karolline De Sousa

Distinguished Professor Elena Ivanova of RMIT University in Melbourne, Australia, said the research team had successfully applied a natural phenomenon to a synthetic material – plastic.

“Eliminating bacterial contamination is a huge step in extending the shelf life of food,” she said.

“We knew the wings of cicadas and dragonflies were highly-efficient bacteria killers and could help inspire a solution, but replicating nature is always a challenge.

“We have now created a nanotexturing that mimics the bacteria-destroying effect of insect wings and retains its antibacterial power when printed on plastic.

“This is a big step towards a natural, non-chemical, antibacterial packaging solution for the food and manufacturing industry.”

The research, published in ACS Applied Nano Materials, is a collaboration between RMIT, Tokyo Metropolitan University and Mitsubishi Chemical’s The KAITEKI Institute.

In 2015, Australia exported $US3.1 billion of food and agricultural exports to Japan, making it the 5th largest exporter of such products to the country.

How it works

Dragonfly and cicada wings are covered by a vast array of nanopillars – blunted spikes of similar size to bacteria cells.

When bacteria settle on a wing, the pattern of nanopillars pulls the cells apart, rupturing their membranes and killing them.

“It’s like stretching a latex glove,” Ivanova said. “As it slowly stretches, the weakest point in the latex will become thinner and eventually tear.”

Ivanova’s team developed their nanotexture by replicating insects’ nanopillars and developing nanopatterns of their own.

To assess the pattern’s antibacterial ability, bacteria cells were monitored at RMIT’s world-class Microscopy and Microanalysis Facility.

The best antibacterial patterns were shared with the Japan team, who developed a way to reproduce the patterns on plastic polymer.

Back in Australia, Ivanova’s team tested the plastic nanopatterns and found the one which best replicated insect wings but is also easiest to fabricate and scale up.

The nanopillars on the surface of a dragonfly wing (magnified 20,000 times).The nanopillars on the surface of a dragonfly wing (magnified 20,000 times).

Ivanova said dealing with plastic was more difficult than other materials like silicon and metals, because of its flexibility.

“The nanotexturing created in this study holds its own when used in rigid plastic. Our next challenge is adapting it for use on softer plastics,” she said.

Since Ivanova and her colleagues discovered the bacteria killing nature of insect wings a decade ago, they’ve been working to design the optimal nanopattern to harness insects’ bacteria-killing powers and use it on a range of materials.

Until recently, it was difficult to find suitable technology to reproduce this nanotexturing on a scale suitable for manufacturing.

But now technology exists to scale up and apply antibacterial properties to packaging, among a range of other potential applications, like personal protective equipment.

Their new research builds on a 2020 study into using insect-inspired nanomaterials to fight superbugs – watch the video below.

The team is keen to collaborate with potential partners in the next stage of the research – upscaling the technology and determining the best ways to mass manufacture the antibacterial packaging.

A pioneer in biomimetic antibacterial surfaces, Distinguished Professor Elena Ivanova leads the Mechano-bactericidal Materials Research Group in the School of Science at RMIT.

The research was supported by the Foundation for Australia-Japan Studies under the Rio Tinto Australia-Japan Collaboration Project.

‘Nanopillar Polymer Films as Antibacterial Packaging Materials’, with co-authors Denver Linklater, Soichiro Saita, Takaaki Murata, Chaitali Dekiwadia, Russell Crawford, Hideki Masuda, Haruhiko Kusaka and Elena Ivanova, is published in ACS Applied Nano Materials (DOI: 10.1021/acsanm.1c04251).

 

Story: Aeden Ratcliffe

21 March 2022

Share

Return to RMIT News
21 March 2022

Share

  • Advanced Materials
  • Research
  • Nano & Microtechnology
  • Science and technology
Engage

Related News

prs-sem1-wrapup-image2-1220x732ps.jpg

A semester of global research: showcasing HDR excellence across three continents

From Ho Chi Minh City to Barcelona to Melbourne, DSC’s HDR Symposia spent the first half of 2026 engaging with RMIT’s global community of Higher Degree by Research (HDR) candidates through formal PhD examinations, milestone reviews and work in progress presentations.

Dr Brendan Dyett holding a vaccine patch.

New study advances dry mRNA vaccine patch design

New research could help make future mRNA vaccines easier to store and distribute.

RMIT University Associate Professor Biplob Pramanik in the laboratory where researchers developed a dual-bubble wastewater treatment approach that significantly improves microplastic removal.

New approach boosts microplastic removal from wastewater

RMIT University researchers have developed a more effective way to capture microplastics from wastewater, using a combination of microbubbles and nanobubbles to achieve removal rates of more than 90% before pollution reaches waterways.

Overview of Paris from Pompidou Center with roof tops.

European cities short on shade as heat bites

New analysis of 5.5 million buildings shows 84% fall short of tree canopy levels required for meaningful cooling.

Show more
aboriginal flag float-starttorres strait flag float-start

Acknowledgement of Country

RMIT University acknowledges the people of the Woi wurrung and Boon wurrung language groups of the eastern Kulin Nation on whose unceded lands we conduct the business of the University. RMIT University respectfully acknowledges their Ancestors and Elders, past and present. RMIT also acknowledges the Traditional Custodians and their Ancestors of the lands and waters across Australia where we conduct our business - Artwork 'Sentient' by Hollie Johnson, Gunaikurnai and Monero Ngarigo.

More information