Recyclable mobile phone batteries a step closer with rust-busting invention

Recyclable mobile phone batteries a step closer with rust-busting invention

Mobile phone batteries with a lifetime up to three times longer than today’s technology could be a reality thanks to an innovation led by engineers at RMIT University.

Rather than disposing of batteries after two or three years, we could have recyclable batteries that last for up to nine years, by using high-frequency sound waves to remove rust that inhibits battery performance, the team says.

Only 10% of used handheld batteries, including for mobile phones, are collected for recycling in Australia, which is low by international standards. The remaining 90% of batteries go to landfill or are disposed of incorrectly, which causes considerable damage to the environment.

The high cost of recycling lithium and other materials from batteries is a major barrier to these items being reused, but the team’s innovation could help to address this challenge.

The team are working with a nanomaterial called MXene, a class of materials they say promises to be an exciting alternative to lithium for batteries in the future.

Only 10% of used handheld batteries, including for mobile phones, are collected for recycling in Australia, which is low by international standards. Credit: Adobe Stock Only 10% of used handheld batteries, including for mobile phones, are collected for recycling in Australia, which is low by international standards. Credit: Adobe Stock

Leslie Yeo, Distinguished Professor of Chemical Engineering and lead senior researcher, said MXene was similar to graphene with high electrical conductivity.

“Unlike graphene, MXenes are highly tailorable and open up a whole range of possible technological applications in the future,” said Yeo from RMIT’s School of Engineering.

The big challenge with using MXene was that it rusted easily, thereby inhibiting electrical conductivity and rendering it unusable, he said.

“To overcome this challenge, we discovered that sound waves at a certain frequency remove rust from MXene, restoring it to close to its original state,” Yeo said.

The team’s innovation could one day help to revitalise MXene batteries every few years, extending their lifetime by up to three times, he said.

“The ability to prolong the shelf life of MXene is critical to ensuring its potential to be used for commercially viable electronic parts,” Yeo said.

The research is published in Nature Communications.

Mr Hossein Alijani, a PhD candidate, and Associate Professor Amgad Rezk with the team's rust-busting invention. Credit: RMIT University Mr Hossein Alijani, a PhD candidate, and Associate Professor Amgad Rezk with the team's rust-busting invention. Credit: RMIT University

How the innovation works

Co-lead author Mr Hossein Alijani, a PhD candidate, said the greatest challenge with using MXene was the rust that formed on its surface in a humid environment or when suspended in watery solutions.

“Surface oxide, which is rust, is difficult to remove especially on this material, which is much, much thinner than a human hair,” said Alijani from RMIT’s School of Engineering.

“Current methods used to reduce oxidation rely on the chemical coating of the material, which limits the use of the MXene in its native form.

“In this work, we show that exposing an oxidised MXene film to high-frequency vibrations for just a minute removes the rust on the film. This simple procedure allows its electrical and electrochemical performance to be recovered.”

The potential applications of the team’s work

The team says their work to remove rust from MXene opens the door for the nanomaterial to be used in a wide range of applications in energy storage, sensors, wireless transmission and environmental remediation.

Associate Professor Amgad Rezk, one of the lead senior researchers, said the ability to quickly restore oxidised materials to an almost pristine state represented a gamechanger in terms of the circular economy.

“Materials used in electronics, including batteries, generally suffer deterioration after two or three years of use due to rust forming,” said Rezk from RMIT’s School of Engineering.

“With our method, we can potentially extend the lifetime of battery components by up to three times.”

Alijani said the greatest challenge with using MXene was the rust that formed on its surface in a humid environment or when suspended in watery solutions. Credit: RMIT University Alijani said the greatest challenge with using MXene was the rust that formed on its surface in a humid environment or when suspended in watery solutions. Credit: RMIT University

Next steps

While the innovation is promising, the team needs to work with industry to integrate its acoustics device into existing manufacturing systems and processes.

The team is also exploring the use of their invention to remove oxide layers from other materials for applications in sensing and renewable energy.

"We are keen to collaborate with industry partners so that our method of rust removal can be scaled up," Yeo said.

‘Recovery of oxidized two-dimensional MXenes through high frequency nanoscale electromechanical vibration’ is published in Nature Communications (DOI: 10.1038/s41467-022-34699-3).


Story: Will Wright

25 January 2023

Share

25 January 2023

Share

  • Sustainability
  • Advanced Manufacturing
  • Science and technology
  • Research
  • Nano & Microtechnology
  • Engineering
  • Advanced Materials
  • Industry
  • Environment
Engage

Related News

Students standing next to supercomputer.

Remote computing power provides equitable access for students

RMIT’s NetLab+ is providing remote ‘supercomputing’ power to vocational education students, across campus and from home.

L-R: Ajmal Abdul Azees and Preetham Akula

Aerospace student named Victoria's most entrepreneurial at international education awards

Aerospace engineering student Preetham Akula has won the new entrepreneurship category at the Victorian International Education Awards 2024.

Outdoor workshop for SydWest seniors and RMIT students at the Coal Loader Centre for Sustainability in Sydney.

Australian-first humanitarian engineering program expanded until 2030

New funding will support an Australian-first project that brings together engineering students and diverse communities in search of solutions. 

Bird's eye view of the coffee concrete footpath being laid along a busy road in Pakenham. Credit: Pete Glenane, HiVis Pictures

Coffee concrete makes its debut in a major infrastructure project

An innovation developed at RMIT University has been used for the first time in a major infrastructure project, being laid into a footpath along a busy road in Pakenham as part of Victoria’s Big Build.

Show more
aboriginal flag
torres strait flag

Acknowledgement of Country

RMIT University acknowledges the people of the Woi wurrung and Boon wurrung language groups of the eastern Kulin Nation on whose unceded lands we conduct the business of the University. RMIT University respectfully acknowledges their Ancestors and Elders, past and present. RMIT also acknowledges the Traditional Custodians and their Ancestors of the lands and waters across Australia where we conduct our business - Artwork 'Sentient' by Hollie Johnson, Gunaikurnai and Monero Ngarigo.

More information