How to make hydrogen straight from seawater – no desalination required

SKIP TO CONTENT

How to make hydrogen straight from seawater – no desalination required

Researchers have developed a cheaper and more energy-efficient way to make hydrogen directly from seawater, in a critical step towards a truly viable green hydrogen industry.

The new method from RMIT University researchers splits the seawater directly into hydrogen and oxygen – skipping the need for desalination and its associated cost, energy consumption and carbon emissions.

Hydrogen has long been touted as a clean future fuel and a potential solution to critical energy challenges, especially for industries that are harder to decarbonise like manufacturing, aviation and shipping.

Almost all the world’s hydrogen currently comes from fossil fuels and its production is responsible for around 830 million tonnes of carbon dioxide a year*, equivalent to the annual emissions of the United Kingdom and Indonesia combined.

But emissions-free ‘green’ hydrogen, made by splitting water, is so expensive that it is largely commercially unviable and accounts for just 1% of total hydrogen production globally.

Lead researcher Dr Nasir Mahmood, a Vice-Chancellor’s Senior Research Fellow at RMIT, said green hydrogen production processes were both costly and relied on fresh or desalinated water.

“We know hydrogen has immense potential as a clean energy source, particularly for the many industries that can’t easily switch over to be powered by renewables,” Mahmood said.

To be truly sustainable, the hydrogen we use must be 100% carbon-free across the entire production life cycle and must not cut into the world’s precious freshwater reserves.

Our method to produce hydrogen straight from seawater is simple, scaleable and far more cost-effective than any green hydrogen approach currently in the market.

With further development, we hope this could advance the establishment of a thriving green hydrogen industry in Australia.

A provisional patent application has been filed for the new method, detailed in a lab-scale study published in Wiley journal, Small.

Splitting the difference: a catalyst for seawater

To make green hydrogen, an electrolyser is used to send an electric current through water to split it into its component elements of hydrogen and oxygen.

These electrolysers currently use expensive catalysts and consume a lot of energy and water – it can take about nine litres to make one kilogram of hydrogen. They also have a toxic output: not carbon dioxide, but chlorine.

“The biggest hurdle with using seawater is the chlorine, which can be produced as a by-product. If we were to meet the world’s hydrogen needs without solving this issue first, we’d produce 240 million tons per year of chlorine each year – which is three to four times what the world needs in chlorine. There’s no point replacing hydrogen made by fossil fuels with hydrogen production that could be damaging our environment in a different way,” Mahmood said.

“Our process not only omits carbon dioxide, but also has no chlorine production.”

three members of the seawater hydrogen research team wearing lab coats in a laboratory

Mr Suraj Loomba, Dr Nasir Mahmood and Dr Muhammad Waqas Khan (left to right) are part of the team working on making hydrogen out of seawater – no desalination required

The new approach devised by a team in the multidisciplinary Materials for Clean Energy and Environment (MC2E) research group at RMIT uses a special type of catalyst developed to work specifically with seawater.

The study, with PhD candidate Suraj Loomba, focused on producing highly efficient, stable catalysts that can be manufactured cost-effectively.

“These new catalysts take very little energy to run and could be used at room temperature,” Mahmood said.

“While other experimental catalysts have been developed for seawater splitting, they are complex and hard to scale.

“Our approach focused on changing the internal chemistry of the catalysts through a simple method, which makes them relatively easy to produce at large-scale so they can be readily synthesised at industrial scales," Loomba said.

Mahmood said the technology had promise to significantly bring down the cost of electrolysers - enough to meet the Australian Government's goal for green hydrogen production of $2/kilogram, to make it competitive with fossil fuel-sourced hydrogen.

The researchers at RMIT are working with industry partners to develop aspects of this technology.

The next stage in the research is the development of a prototype electrolyser that combines a series of catalysts to produce large quantities of hydrogen.

‘Nitrogen-doped Porous Nickel Molybdenum Phosphide Sheets for Efficient Seawater Splitting’, co-authored by Suraj Loomba, Muhammad Waqas Khan, Muhammad Haris, Seyed Mahdi Mousavi, Nasir Mahmood, et al., is published in Small.

*Source: https://www.iea.org/fuels-and-technologies/hydrogen

SDGs

Nasir Mahmood green hydrogen seawater emissions-free carbon-free sustainable

Continue exploring

Read related RMIT impact stories

Part of the team behind the EINSTEIN AI program.

Improving fungal infection detection and control for immunocompromised cancer patients

An RMIT research team partnered with clinical, research and data organisations to develop and implement an AI-powered surveillance tool, improving how invasive fungal infections are monitored in cancer patients.

Improving gender representation in Australia’s cyber security workforce

RMIT research has provided greater insights into gender-related workforce challenges faced by the Australian cyber security sector and identified ways to expand and diversify the talent pool.

Creating the world’s fastest internet on a single optical chip

Researchers from RMIT, Monash and Swinburne universities achieved the world’s fastest internet data speed – enough to download 1000 high-definition movies in a split second – using a single optical chip.

Car interior with side airbag seat covers fitted.

Improving safety of car seat covers to reduce injury risk

Professor Rajiv Padhye and his research team developed a new manufacturing method for removable car seat covers that ensures deployment of side airbags, reducing risk of fatality or injury following side-impact collisions.

See more stories +

Connect with RMIT Research

If you're not sure how you can best work with us, our team can explain what's possible and put you in touch with the right person.

Contact us

aboriginal flag float-start

torres strait flag float-start

Acknowledgement of Country

RMIT University acknowledges the people of the Woi wurrung and Boon wurrung language groups of the eastern Kulin Nation on whose unceded lands we conduct the business of the University. RMIT University respectfully acknowledges their Ancestors and Elders, past and present. RMIT also acknowledges the Traditional Custodians and their Ancestors of the lands and waters across Australia where we conduct our business - Artwork 'Sentient' by Hollie Johnson, Gunaikurnai and Monero Ngarigo.

Learn more about our commitment to Aboriginal and Torres Strait Islander peoples